Ratrig Vcore3 Enclosure 2.0 modded Magnet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
enclosed magnet that must be inserted during the print
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I used the original step files from Ratrig to create this mod. It was hard to get the magnets into the stock magnet mounts for all front / top panels.
So I decided to make them “enclosed” to the printed files.
I printed the parts with 0.2mm layer height and 0.2mm first layer. That needs the pause command during the print on layer 27 (magnet_mount) or layer 29 (magnet_holder). Insert the magnets (10x4mm) and resume the print (keep in mind to prime your nozzle a bit during the pause, depends on your settings).
The 2 3mf files are saved projects from my SuperSlicer.
Feel free to adjust the files as you need, fusion and step available :)