Ratrig Vcore3 Enclosure 2.0 modded Magnet Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
enclosed magnet that must be inserted during the print
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 58
- Makes
- 0
- Views
- 655
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I used the original step files from Ratrig to create this mod. It was hard to get the magnets into the stock magnet mounts for all front / top panels.
So I decided to make them “enclosed” to the printed files.
I printed the parts with 0.2mm layer height and 0.2mm first layer. That needs the pause command during the print on layer 27 (magnet_mount) or layer 29 (magnet_holder). Insert the magnets (10x4mm) and resume the print (keep in mind to prime your nozzle a bit during the pause, depends on your settings).
The 2 3mf files are saved projects from my SuperSlicer.
Feel free to adjust the files as you need, fusion and step available :)