Liczymy pasujące modele…
This is a mod to Rat Rig's V-Minion 180 printer to remove the separate electronics box and make the printer a single unit. Electronics box is designed to take boards compatible with Ender 3 board - SKR E3 V2 in my particular case. The…
Modified version of the X belt tensioner of the RatRig Minion. The original required a Square nut that could when inserting crack the part or creates a bulge on the outer wall what would make sliding in difficult. Design is for…
Since I like the design of the original spoolholder 2.0 from Ratrig for its simplicity , I've redrawn it in the same style. The smaller one will fit a spools max 80mm wide (almost all 1kg spools), and the larger one will fit maximum 110mm…
4 Perimeters 5 Top 3 Bottom layers 40% Infill
Why? I overhastily ordered my VCore 3 500 side panels with the standard dxf's provided by RatRig, ignoring, that I won't use the standard LAN sockets, so there was this rectangular hole… Furthermore I don't like exposed mains wires inside…
Why? I wanted to use a high quality IEC socket including a double fuse and a capacity to carry 10amps of load (VCore 3.1 500). Furthermore I don't like exposed mains wires inside the printer. Features: Fixing the IEC socket in a…
C19/C20 IEC mount for Rat Rig V-Core3 500mm. Designed to fit Uxcell brand C20 socket and rocker switch: C20 Panel Mount Plug Adapter AC 250V 16A 3 Pins IEC Inlet Module Plug Power Connector Socket Staight AC 20A/125V 22A/250V DPST 4 Pin 2…
If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO
I'm changing to a skeletonized gantry + mgn9h to make my Y axis lighter. I couldn't find a mgn9h mount so I made one.
Hi, I've designed Klicky Z-Endstop for RatRig V-Minion with EVA3. Because of it's construction is really hard to get ‘space’ for that solution. But after few ‘little’ modifications You will be able to do it! First steps: Move X engine…
This drawing can be used to cut a bottom panel that fits inside of a RatRig VCore3 500mm printer. This remix allows the installation of the panel without removing the three Z-Axis motors and mounts. The tolerances on this panel are very…
I made 3 small tapered pins to help line up the heatbed heater pad. It worked really well Threaded to fit the aluminum plate(bed) mounting bolts As always, I uploaded the Fusion 360 file
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
Uses the same hole spacing as the floor panel. Mounts to the left of the rear rail.
******************************************************************** IMPORTANT: This only fits with back panels up to 2mm (not BOM standard) ******************************************************************** This is a Socket Mount for…
Corners that helps align the magnetic buildplate on the bed and they're flush with the printing surface. For 6mm bed. Countersink bolts are a must if you want the flush surface. BOM: 6x M3 nuts 6x M3x16mm bolts with countersink head
I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…
Use M3x6mm screws with washer to fix the corners to the plate. Needs support. Step file contains built in support for multi material printers.
Ratrig V-Core 4 with a door on the front panel instead of the all clear front paneling seems like it's missing something without a display, so mounted a 7" HDMI touchscreen. This one is for the BigTreeTech HDMI7 (tried to insert a link…
Uses m2 Screws and m2 Brass inserts. Feel free to modify, but it works. (you see the bulk of the print and the tip of the nozzle)
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
Sturdier RatRig 4 VCore Front Clamp with more clamping force
Route the ethernet cable via the bottom hole up the middle extrusion in the back into the electronics box. Connector used: https://www.amazon.nl/-/en/dp/B07NJ5XNMN
A dock to go with Ratrig toolhead beta2 and the front piece and mount in https://www.printables.com/model/963737-mount-for-euclid-probe-and-a-new-front-for-ratrig. The dock is now thicker, so that the lead screw bearing actually reaches…
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
Update 3/3/26: These retractors last around a 1000hrs of print time before the winding mechanism fails. The stock piano wire broke at the extruder, so I needed something to hold the umbilical up and out of the belts / print. Simple…
The adaptor plates allow you to mount the Vevor casters (2 inch, GD60FD) to your RatRig V-Core 4 500. They allow for clearance on the front Z stepper motors. I used an M8 to M6 sleeve reducing nut to screw into the M8 threads on the…
I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…
This model is intended to be used with MandalaRoseWorks bed arms. It uses A1 mini silicone brushes (6x26mm size), such as https://a.aliexpress.com/_EIe1RSC I've also added a mod for two brushes, in case you want more space for your custom…
Update 11.08.2026: Added EBB36 Gen2 toolboard mount for the LGX Lite v2 and Moschito Magnum+ Liquid spacer Update 29.07.2026: Added 19 ID hose duct for the EBB42 Gen2 / Sherpa Mini combo Update 11.07.2026: Added OS2 toolboard mount for…
I used four walls, 20% infill, 0.1mm layers (helps with the overhangs).
Hardware Needed: #4 cutting blade 2 M3x16 hex screws ballpoint pen spring To make this design work there are some software changes needing to be made. I increased the size of the bed to 410 in the X direction in the stepperX section of…
📦 RatRig V-Core 4 – Enlarged Electronics Box (Panel-Based) This enlarged electronics box for the RatRig V-Core 4 is designed for users who need more internal space, improved cooling, and a clean integration of additional electronics . The…
WORK IN PROGRESS Custom build CoreXY based on Monolith gantry and Ratrig Z system Monolith AWD Trident gantry modified to fit Tronxy 2020/2040 frame, 6 mm belts Compatible with other parts from original designer, you can download the rest…
The RatRig VCore 3.2H XY Joiner comes with the VSlots on the model - I have a lightweight gantry that doesn't have VSlots - so I've remixed the official model from RatRig and removed the VSlots - fits most Lightweight Gantries. My gantry…
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
I adapted PP000334-rr_toolhead_vc4_front_beacon_V01_20240425 front part to accommodate Dragon Ace Volcano hot end. It allows the reuse of all other parts in the hotend, including the original metal top plate. There is a relief for both…
Improved version of the original V1 hinges for Ratrig V-Core 4 500mm and 400mm! The corner brackets do not have to be removed anymore. Original version: https://www.printables.com/model/1090231-ratrig-v-core-4-split-front-panel-hinges…
What is it? This is a multi-piece extension for the RatRig V Core 4 500 IDEX. What does it do? The main purpose is to have the touchscreen from BTT the Pi TFT70 V2.1 be integrated onto the frame. But this also raises the top panel by…
Introduction With two of these you can create hard mechanical reference points to reliably square up both Y-axis Extra hardware: 2 * DIN 603 M6 x45 carriage bolt 2 * M6 nuts with nylon locking ring 4 * any type of M4x20 bolt Note: These…
There are 2 versions provided. Select the correct one for the side of the printer you want to mount the holder. You'll also need the standard piece, and the biscuit to assemble. Recommended to print in ABS for enclosed printers
Magnum Plus Hotend Toolhead for RatRig4.0 & 4.1 Since Disrupt has not been officially released, I designed this as an independent model based on reference photos. Only three sheet metal parts need to be fabricated, so the production cost…
RatRig Minion – CAN mod držák (náhrada za RPi pozici) Držák pro upgrade tiskárny RatRig Minion na CAN komunikaci. Umožňuje instalaci CAN převodníku na původní pozici Raspberry Pi a přesunutí RPi k displeji TFT50 , kde je umístěno do…
There are some special versions included for electrical parts. One for a Schurter DD12 power entry module - a common power inlet with switch, and another version for a TE FN9260 inlet + PROMET S25 cam switch. But I'm sure you all have the…
Ratrig Vcore 4-chamber heater. Two 300W 24V heating elements, one 120mm radial fan, and one thermistor (example from a V6 block, 100K). 16 threaded inserts M3x7. The two large parts should be made of a heatresistant, material (ABS, GF).…
Update: fixed a bug that during the start print the nozzle wipe would not take the preset temp and default to 150C Copy the complete text in your printer.cfg and adjust the CLEAN NOZZLE parameters for the correct printer size and wipe…
This mod is for the MRW Z arms I included the step files if you want to edit anything. I really liked the model by @Kuroi_3472520. I just like the Qidi plus 4 silicone brushes better. Also the original left side brush was about 7mm to low…
I had to lay some wires from the upper to the lower side on the backside of the RatRig. To prevent them touching the belt, I've created this simple bridge. It snaps on the 3030 and has openings to fix the wires inside the extrusion. Print…
Bracket to mount my WaveShare 7" LCD to my RatRig V-Core 3 400 using the Articulating Arm. The mount for the articulating bracket uses M5 heat inserts and M5x16 screws.
This is a slightly modified remix. For changes see changelog.
Modified cable guide with brackets for two Wago 221 420 connectors
This is a holder for a Rpi camera module V3. It's mounted in a corner and is nearly invisible. It is wise to print it in ASA, ABS or some other material that can withstand heat. Materials Needed: Rpi Cam module V3 A flatcable that is 2…
This is a Ratrig Hybrid 6WD front gantry designed for the INDX XY motion system. To reduce Y-axis losses that were present in the previous 6WD design, the installation direction of the Y tensioner has been reversed. The front motor mount…
Top plate for Cristian's CNC Toolhead mount for RatRig V-Core 4 . I've found that if you use large (3-5kg) spools and/or have a very long filament path, performance with this large extruder is greatly improved. I have both and have tried…
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
Remixed duct with 2 main modifications: ability to mount on the back of enclosed RatRig V-core 3 (left or right side, mirror model if needed) - use M6x16 cap head screws, instead of M6x12 single cable port duct with conduit for one of the…
Extended the mount by 20mm to allow the fan to reach further into the electrical compartment.
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
Mount for Euclid for the Ratrig toolhead beta 2. To fit this, you also need a new front piece for the toolhead, i.e. one that does not have the Pinda mounting tube. The new front piece is included. I made this to make the head lighter,…
I wanted to install retractable casters on my RatRig Workbench 2.0. I choose https://www.amazon.fr/dp/B0C5DDYLX8/ref=twister_B0C5J2D7JJ?_encoding=UTF8&th=1 Holkie 1000 kg, which seem to be fine for my needs. This a model to connect the…
I widened the vcore 4 umbilical guide and opened it up to accept more wires for the umbilical cable to the toolhead.
The standoff for the Vertical Toolboard for the Ratrig V-Core 4 doen't fit if you use the Orbiter 2.0 filament sensor. I've remixed it. Press fit in the standoff and you will not need to cut or modify the standoff. If you want added…
Added some holes so the nylocks won't make contact with the tensioner containers. Please visit the original page for the pulley holders.
Wall Count: As many wall counts to fill the entire part Infill: 100% infill Material: ABS/ASA
Hey feel free to test it and please give me some feedback :)
Used the idea from https://www.printables.com/model/881165-door-hinge-remix to build a set of door hinges for my RatRig VCore 4. At least all parts have been changed, adapted, modified to be used on my printer. For each hinge 2 magnets…
I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
Uses the same hole spacing as the floor panel. Mounts to the right of the rear rail.
This model includes two modified parts incorporated into the EVA3 Assembly the comes with the RatRig vCore3.1 printers. These changes allow mounting of a Beacon3D scanner (revH - low profile) underneath the EVA3 behind the Phaetus hot…
STEP file for easy modification. I used an M5 bolt and nut to mount it to the bed. Mirror along x-axis for right-side bedstop.
This is a Dual 12mm RatRig V-Core CPAP Electronics Wire Guide Rear. If you have CPAP it is a must, as with the single version you could only attach the cpap tube.With this dual wiring guide you are able to mount both cpap and wiring…
The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…
Assemblytool for the Enclosure 2.0 from the Ratrig VCore 3.1 (using for the Frame). Two different Tools available. 200 for the Printersize 200mm, the 220 is for all other Sizes (300-500mm). -------------------------------------------…
I prefer to run my printers on ethernet, but the stock metal electronics enclosure on the vcore4 does not have any great way to run and external ethernet cord. This panel integrates a keystone jack port to use a standard keystone ethernet…
Disclaimer: This model has only been tested on a V-Core 4 500 Hybrid. This has not been tested on an IDEX setup and may not clear a dual head setup. This has not been tested on a 300 or 400 sized machine. After I convert to IDEX I will…
Schleif-tec X-Gantry for RatRig V-Core 4 Spacer https://spannsysteme.shop/produkte/x-gantry-for-ratrig-v-core-4
Used on the RatRig V-core 4 500. When rear mounted the original BTT cables can be used. The display holder requires two M4x5mm screws that I threaded into to plastic and / or glue. This is made so it is easier to print, but maybe I will…
I create a pcb for the lightning of the corner at the RR VC4. So i added 2 more holes in the backside for a cleaner wirering and my custom PCB, also i flat the diffusior a bit to improve the light what is coming out :) if you are…
I want to use an either-net cable on my Raspberry Pi instead of WiFi. There is not a provision to get the cable through the bottom panel. I also made a second port for the Z motor wiring to enter from the bottom. The holes are big enough…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
The model is divided into a mount and a spacer. You can easily adjust the height of the hotend mount in the slicer by simply increasing the height of the spacer. There is a possibility of fastening SuperPinda probe. Needed 4 x М2,5 * 14…
Ratrig V4 inserts thats support A1 Mini silicon brush. You can get it from Ali - https://sl.aliexpress.ru/p?key=oOeNrmN choose A1 Mini. Print without support.
Small adjustment, the original design has collided with the oozeguards.
Ratrig VCore 4 front belt tension drill guide
Изменены размеры отверстий под профиль СобериЗавод V-профиль 2020, т.к. он не сходится с оригинальным профилем.
Hello! There is a modified backand toolhead mount to accomodate a CPAP cooling solution for the RatRig Toolhead on the VCore 4. It does require for the current plate to have the 4028 mounting part cut (cutting template included) as it…
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful. I designed a holder for a 19mm E-Stop. I have mine from here: https://de.aliexpress.com/item/1005004940945269.html (Red LED, 1NO 1NC,…
Nozzle wipe system that uses a wire brush to wipe the nozzle on tool change, sits between the nozzle homing spot and the bed so you get a good brushing on the way over. Compatible with beacon (wire brush will reset your beacon, trust me…
i do this remix for having ratrig logo on lgx sensor mount. work with same part as the original version.
if you are using pinda, change: [probe] x_offset: 20.5 y_offset: -9.7 Needed 8 x М2,5 * 14 screws
Ich habe das teil so konstruiert das es möglich ist die kabel ohne den Klavierdraht oben zu halten.
Sturdier RatRig 4 VCore Front Clamp with more clamping force
Der Originale Abstandshalter zwischen extruder und Toolboard ist zu lang wenn man den Orbiter Filamentsensor benutzt, daher habe ich einen Konstruiert. Dieser passt Perfekt und durch die m3 heat inserts schraubt man in ein richtiges…
Remix of only VC4_3do-nozzlecam body.3mf Read the original project for details.
![RatRig toolhead CHC Pro mount [IDEX]](https://media.printables.com/media/prints/1067177/images/8073731_bf0f648f-8a72-494a-9d26-5d3a7bc5d744_80499acc-a965-4343-9a4b-88cdce6e4d0a/11.png)
