1 / 2
BentoBox v2.0 Single Cable Port Duct for RatRig V-core 3 — zdjęcie 1
1 / 2

BentoBox v2.0 Single Cable Port Duct for RatRig V-core 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed duct with V-core 3 mounting holes and only one port for fan cables with a conduit to route them.

Ocena
0 / 5
Polubienia
4
Pobrania
52
Wydruki
1
Wyświetlenia
482
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remixed duct with 2 main modifications:

  • ability to mount on the back of enclosed RatRig V-core 3 (left or right side, mirror model if needed) - use M6x16 cap head screws, instead of M6x12
  • single cable port duct with conduit for one of the fans, inspired by this model.

Note: I've only tested on 300x300, but I'm attaching STEP file in case you need to modify it.

Tagi