Ratrig Toolhead V-core 3.1 Filament Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Ratrig Toolhead V-core 3.1 Filament Cutter
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hardware Needed:
#4 cutting blade
2 M3x16 hex screws
ballpoint pen spring
To make this design work there are some software changes needing to be made.
I increased the size of the bed to 410 in the X direction in the stepperX section of the printer.cfg file.
[stepper_x]position_max: 410
I also changed where priming takes place to be to make sure the new X value would cause an accidental partial cut during priming. I did this my changing the offset from 5 to 10 in the x direction in the [gcode_macro PROBE_FOR_PRIMING] and [gcode_macro PRIME_BLOB] macros. However I found a quicker way that does require modifying the macros themselves. In the printer.cfg file add the following under the RatOS macro section:
[gcode_macro RatOS]
variable_nozzle_priming: "primeblob"
variable_nozzle_prime_start_x: "min"
This will move the primeblob from the side with the filament cutter to the side with the endstop limit switch.