Liczymy pasujące modele…
These flower magnet models I designed for a friend and was very happy with how they turned out! My designs were traced from a photo of flowers that my friend drew for another friends wedding. The flowers have holes on their rear side that…
I needed some child-safe-ish magnets, so I desinged 9 different shapes, in which you can insert a magnet during printing, so the magnet is encapsulated in the print with no way of getting out. Dimensions Magnets needed: Round 8 mm…
I have a specific scissor. I could not find a fitted bin for it so I made this one from Seishin's OnShape Gridfinity Generator as a starting point. No magnets or screw holes. Link to OnShape if you want to copy and mod. Start from scratch…
holder for computer/phone charges.
This hook holds a headset with a headband of 40mm or less. You can place up to 10 magnets (12mm x 3mm or 0.47in x 0.12in) in the back depending on the weight of your headset. Add some adhesive felt or rubber for more friction and…
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
Fusion360 Parametric Laser-Cut Gridfinity Base Plate by The Mad Noodle Introducing a versatile and customizable Gridfinity Base Plate designed for laser cutting! This fully parametric design, composed in Fusion360, offers flexibility of…
This screw tray was designed to collect the screws when taking electronics apart ;) It's a bit higher (22mm tray inside) to keep a decent amount of them. The rounded edge on the inside is to get the screws out easier. At the bottom of the…
Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…
--- English version below --- Das Gehäuse eines der Magnetschlüssel für die Schubladen-Kindersicherung ist auseinandergebrochen. Daher habe ich einen simplen Ersatz für den inneren Magneten erstellt. Passt für einen Rundmagneten D 20mm /…
Just a smaller version of the original design. My work table is too small for the original design.
Dont have magnets (yet)? Use those pins to connect the bento boxes. Print with precise wall 20mm layer height more elephant correction (ca 0.25mm)
Miniature bases of various sizes; 28mm, 40mm, 50mm, 65mm, 80mm, 100mm, 120mm, 140mm, 160mm. 8x2mm magnets 2/21/2026 - Updated files, and added .f3d file
This modular fidget slider uses two magnets and an interchangeable texture plate to create maximum satisfaction. 10 different texture plates are included in the model files. There are 4 printed pieces: The base, the housing, the texture…
The holder uses 4x magnets of the size 8x3mm (Link to aliexpress: https://s.click.aliexpress.com/e/_oDwm2eR) And i also have some inserted slots to use some velcro cable organizer 10mm width (link to aliexpress:…
6mm x 2mm or 10mm x 3mm magnet holes. You can mix and match if you want. I found the 6x2 perfectly strong enough but I also have lots of 10x3 so I added those (very strong). They press-fit for me, but your mileage will vary. The 6x2 holes…
Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…
I enlarged this model and disassembled it into individual parts so that it has a diameter of approx. 46 cm. It also has holes for max. 8x2mm magnets to attach various photos. For assembly you need: 13 long connectors 4 medium connectors 3…
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
Printed in Verbatim PETG 0.2 mm layers. Make sure to insert the magnets with the same poles in both holes of the bottom piece and the opposite poles facing down on the top piece. I found it easier to push the magnets into the bottom piece…
This in my first print for baby activity board. It lets them connect color, shape and it snaps in place thanks to magnet. Make sure you glue down the magnets (6x2mm) so they cannot detach. Just use regular wood screws to attach it to…
This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system
Super simple but very useful – the stuff that 3D printing was invented for 🙂 I have a couple of Flowtron mosquito magnets in my yard but replacing octenol has always been a hassle. The cheap octenol cartridges I buy don't come with…
I like the original from lazyslacker (credits go to him), but I didn't want to stick my sensor to the mount with the double sided tape. So I added 2 holes for magnets (8mm diameter, 1.8 - 2mm height). The Aqara sensor already has two…
Refer to the original post for further model details.
You want to simply improve the WiFi reception of your Prusa Core One ? you're at the right place ! Prusa Core One Wi-Fi module Back-Cover + Stand or Magnetic My Prusa Core One couldn't catch the Wi-Fi signal in my cellar, so I moved the…
❤💙 Uncle Sam Heart Magnets – 4th of July Edition 🇺🇸 | Youtube Video ✨ A festive and functional 3D-printed magnet set inspire from our Indepedence Day Collection ! Perfect for decorating your fridge, office board, or party setup for the…
These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever. Split into objects, flip them on their backs…
Resize magnet arm and magnet hole to handle up to 5 magnets.
See the pictures to see what I made this for, you can use it for any type of door or frame with hinges. The two pieces hold 5mm round magnets by pressure fitting them, I used simple pliers to do that, and it stays in place snug. Make sure…
This is a remix of the original snap fit case bottom as well as the version of the top made for the Armor Lite V5 heatsink. This remix is based on the V3.1 case. I printed this with Sunlu transparent PLA with the 0.25mm Structural…
Can make out of any filament. To clear the poop, you must remove the entire chute. To do this, simply lift up and pull away. 41048.38896 mm³ No supports needed if you choose that file
Jan_P's creation, but with hotend hoders. You can select the number of hotends. This sits on the right side of the printer.
README Print Instructions Space the both parts far enough away if printed together to make sure the magnets don't accidentally jump out of the holes. (Shouldn't be the case if you have a magnetic build plate) Absolutely make sure to stop…
The stick attaches to the adapter using magnets and friction. All you need are two 4x2mm magnets, which you glue on with superglue. The adapter is designed for first-generation Xbox Elite sticks, not second-generation ones.
These flower magnet models I designed for a friend and was very happy with how they turned out! My designs were traced from a photo of flowers that my friend drew for another friends wedding. The flowers have holes on their rear side that…
added a negative volume cylinder and sphere (for the chamfer) to make the opening bigger for 8x3mm magnets.
Cyberpunk style key cover with magnets This cover is for that one key that is important to you. Or use this cover to ensure the key easily located because of bright colors! It simple design in 4 part with 4 connectors and 4 magnets. Very…
Vorbereitung: Nach dem Druck die Stützstruktur entfernen Anwendung: Magnete ins Magazin einsetzen ggf Haltemagnet einsetzen (optional: Einkleben/Mit Klebeband fixieren) Magnet herausdrücken Magnet an den Schablonen-Magnet übergeben.
Originally printed the Drybox from Prusa Guy but the first Prusament spool I inserted was due to some production fail 2 mm wider and could not fit in. So tried the mod from DG-RoboTek that gave me the extra milimeters but already during…
I really like the hinged version of Top Cover mode for CoreOne, but I only have 8x3mm magnets at home so I remixed the original back cover with 105°angle to hold them. Also i used stepped chamfers from main Top Cover model so it snaps…
Starting to learn how to make model! I needed a small container 5*5*2cm to store some small items so that these small items would not be thrown around the table but would be available, then this box is useful. Since the printer is always…
Design Concept The modular Disney magic band stand is designed to hold and display magic bands in a fun and organized manner. Utilizing magnets for easy customization, this design allows users to mix and match stands based on their…
I recently found out that my pc case was magnetic. So I took the chance to organize my desk with magnets. Here's the first model I actually made without any remixes. This only requires a 8x3 magnet
This is the best holder I've found for hanging a Polydryer box off my Core One. I made a few changes to Narcorex's model to make it fit my magnets and print faster (see differences section). When printing, be careful since the model is…
About Fridge magnets that are designed to look like the window controls inside of macOS. Includes the three different versions of the „expand“-button. Magnets The parts are designed to fit a D6x3mm magnet on the back. The magnet should…
Affiliate links for my favorite filaments to help support what I do are here: Linktree All 5 magnets print in around 1 hour of printing time. My wife likes to hang magnets around her work so I made these for January. Hopefully these will…
A magnetic clip to hold and display your Printables badges. @denisgomez_469657's original file was for (2) 5x3mm magnets, and I just altered slightly to accommodate (2) 6x3mm magnets.
I wanted to add some hidden magnets to the original part. added spots for a 10mm dia magnet, or 12mm dia magnet as well as a 10x20x3mm magnet in the rail itself.
Print the two files seperately on two build plates if not big enough. Make sure to use 20 degree threshold and automatic tree supports (build plate only) to reduce materials. 15% infill is fine.
I remixed Cemk's excellent project by replacing the screw mounting holes with two 5x2mm magwells.
same as oifhrisks excellent opener, but now with magnet slots for putting it on the fridge! fits 18.5x9x2.5mm magnets (advertised as 20x10x3 available from dozens of sellers on aliexpress).
Using the same 5x5mm magnets as the original, but I wanted the magnets embedded into the print just to make sure they never accidentally fall out. The magnets have a slightly looser fit than the original so they should easily slip into…
I tried to make this as similar to the original models as possible; just hacked together pieces in PrusaSlicer, so there's not a proper stl file. Uses the ‘original fit' connectors, but you could substitute ‘loose fit’ connectors if…
Affiliate links for my favorite filaments to help support what I do are here: Linktree Cool Plate Supertack is recommended if you would like the best surface finish. ( https://us.store.bambulab.com/products/bambu-cool-plate-supertack )…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
Another homemade magnetic dosing funnel for 51 mm portafilters, fitted with 10×5×3 mm magnets. When slicing, add a pause to insert the magnets, and another for a color change if you like. Printed with Qidi Matte PLA and variable layer…
This remix uses 10 10mmx3mm magnets but works perfectly fine with less. Printed with PETG but PLA should also be fine. Added a small hook to stabilise position Increase the magnet size to 10mm x 3mm round magnets Increased the width in…
This is multiple joints expendable phone holder. It fits long nut M6 in the bottom (up to 27mm), so it can be attach to fishing magnet screw (M6). On the top, you can super glue 58mm-ish phone magnet. All screws need to be size M6 and…
Magnetic pistol holder with embedded magnet cavity. Mounts most semiautomatic pistols to a wall, in a safe, under a desk, or in a vehicle. Will also hold steel magazines. Cavity made to fit four standard 60x10x5mm neodymium magnets.…
I had small 5x1.8mm magnets lying around so I remixed the original design and added 2 more (5 total per tray) for equivalent magnetic force. Works well with these tiny magnets. Add a pause before the layer filling magnet holes and put…
Cute Fridge Note Magnets 🧲 Sweet notes on the fridge never looked better! These cute, fun layered magnets are perfect for holding reminders, photos, kids’ artwork, and grocery lists. Designed for easy multi-color printing using an AMS…
🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with my models!
This is a simple remix of https://www.printables.com/model/49480-led-rgb-remote-holder with added pockets for 6x3 magnets to the base for mounting. Printed in PETG on an Elegoo Centauri Carbon 0.4 nozzle, 0.2 layer height, no supports. I…
All of my animal location pegs should be printed at a slow speed for the best results. If you’d like to see any other animals, just let me know! 🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making…
These mini wine glasses add some functional and classy flair to your fridge! Designed for a small circular magnet that's 1mm thick and 3mm in diameter, but model can easily be adjusted to whatever magnets you have on hand by putting a…
This is 2nd version of my ring box, you dont need magnets for this one, if you want to see real photos, look at model below, this one is the same, just no magnetic, only diference is that the upper part is smaller You will just put lid…
A simple cover for the magnets (9x1,8mm) for the LED name tag. Insert a pause for inserting the magnets.
Since Games Workshop miniatures tend to be spindly and fragile these days, I wanted to add magnets to the bottoms and sheet metal to storage boxes to keep the miniatures safe. These inserts work around the various features underneath the…
3 Perimeters 15% Gyroid infill 3 top- and bottom layers No support
A small Yo-yo holder that will fit a Duncan Butterfly style Yo-yo. There are small hidden magnets in the lid and body that will need to be inserted during the print. Hardware Needed: 3mm x 2mm magnets (need to be very strong) Printed on…
Simple fridge magnets that look like Toblerone pieces. Print 2 edge pieces and however many middle pieces you want. Important: There is a pause at layer 33 (around 23 minutes) so you can place the round magnets in the slots. Thank you! If…
Just like the magnetic parts on the original, but using round magnets instead of the original bar magnets. The cover isn't changed so it isn't part of the remix. Still need that part from the original. From the remix description: Changed…
Printed using a 0.2mm layer height and using 6x1.5mm magnets - will accomidate up to 2mm thickness but untested in my use case
Remix of @omaenogyudon's filter mount. Instead of the fixed-size magnet mounts, you can use any magnets up to 20mm wide, as long as they are strong enough. Still printable without supports. These filters fit:…
This is a print-in-place protective case for the Parker Jotter pen with integrated magnetic closure. The case is printed as a single piece with a functional hinge and requires no assembly. During the print, magnets can be inserted into…
I needed a compact case for my Gillette Mach 3 Shaver that would fit well in most toiletries bags. Vent holes have been added to the top and bottom to help ensure the shaver does not stay damp and any water would drain out of it quickly.…
Same basic idea as the original, added spots on the back for some 6mm x 2.5mm magnets
Mit passenden Neodym-Magneten ergänzt, hat man einen praktischen Magnetpin. Der Magnet wird einfach mit Sekundenkleber eingeklebt – das Entfetten nicht vergessen! Das Modell ist so gestaltet, dass der Magnet minimal übersteht, um eine…
with 4 magnets 10mm x 6mm
A set of miniature bases with an attachment for magnets. Bases are in increments of 25mm, suitable for non-metric playmats but will also work just fine if you're playing on an inch-based terrain. Some bases also come prepared to attach an…
A simple holder matching my miniature bases with magnets (linked below). Requires an empty insert piece found on the original HSW set (thus added as a remix for convenience) as well as 5mm x 1mm magnets. Best printed lying flat on the…
I had several small problems with clickfinity based baseplates like my CLICKBase as bins hard to insert/remove, especially if the bins are bigger creep changes the holding power slow to print so i fixed those issues with this connector.…
To hold the lid shut, i used the tiny magnets from Dexcom G7 Sensor applicators but you can also get a bunch of 5 x 1.5 mm magnets on AliExpress. For the hinge bolts i used the threaded ends of 2 mm bicycle spokes. I mounted them by…
I didn't have any 8x3 magnets on hand, so I made it fit 5x3mm magnets instead. Uses 2 magnets in the base, to make up for the lost diameter, plus are top-loaded, to get the magnets closer to the lid. Chamfered the inside and bottom edges…
print it in the orientation it imports in each hole will take 2 6x2 or 6x4 magnets make sure the magents are oriented in the same polarity
I wanted to make some pride magnets and here they are! Technically those models can be used to make any flag. Holes' on back of the magnets diameter is 8mm - optimal size for 7mm small round magnets Holes are 0,5mm deep - just to mark…
I made this with ELEGOO PLA and magnets of 6mm x 3mm Printer settings: 0.4 mm nozzle 0.2 mm layer height 15 % filling Gyroid 3 walls No support Make sure to add a pause in your slicer For the lid pause at layer 182 For the case pause at…
For Might Counters you need a stop on a layer 5. It should happen automatically but if it doesn't, stop on layer 5. It doesn't need AMS or Magnets so it is hassle free.
See original for full details and template for address labels. Only use this model if you want to use 10mm magnets instead of 8mm.
needed 8 magnets 6x3mm or less if you want printed with PLA+ 0.2 layer height
Fun and colorful emoticons. Use them to decorate or show someone how you feel! You'll need 6x3 magnets and a little glue
this is a super great way to travle wih penny sleeves and top loaders at all time to keep your cards in mint condition! Not only is it great for travel but you can also just bring it along with everyday life! It uses 8 3*5 magnets (3mm…
Printing Print them standing: Assembly Use super glue to insert the magnet. Maybe a helper magnet from the other side like this would be helpful:
Remixed, enlarged 150% and added 6x3mm recess for magnets
