Magnetic Drybox Docking Part with TPU Seals and 6x3mm magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this docking part after I discovered @Ben Model magnetic connectors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After I discovered the brilliant magnetic model of @Ben, I wanted a docking part for it to finish my drybox setup.
For this system you will need:
PTFE PC4-M10 connector
6x3mm magnets (4 for each connector+4 for the endcap)
A spool of TPU 95A, personnaly I used a cheap one from Amazon.
A spool of PETG
Print instructions:
For the back seal use TPU.
For the main part I printed the first 1,2 mm layers in TPU and the rest in PETG. I setted a color change in the slicer and changed material. I modified a bit temperature during printing and worked well!
Hope it will be useful for you to.
Enjoy and never stop printing.