1 / 7
Magnetic Drybox Docking Part with TPU Seals and  6x3mm magnets — image 1
1 / 7

Magnetic Drybox Docking Part with TPU Seals and 6x3mm magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I created this docking part after I discovered @Ben Model magnetic connectors.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

After I discovered the brilliant magnetic model of @Ben, I wanted a docking part for it to finish my drybox setup.

For this system you will need:

  • PTFE PC4-M10 connector

  • 6x3mm magnets (4 for each connector+4 for the endcap)

  • A spool of TPU 95A, personnaly I used a cheap one from Amazon.

  • A spool of PETG

Print instructions:

  • For the back seal use TPU.

  • For the main part I printed the first 1,2 mm layers in TPU and the rest in PETG. I setted a color change in the slicer and changed material. I modified a bit temperature during printing and worked well!

Hope it will be useful for you to.

Enjoy and never stop printing.

Tags