Holder for CORE One Nozzle Replacement Tool and Nozzle Wrench (Skadis/Magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small holder to store the CORE One nozzle replacement tool and a nozzle wrench!
- Ocena
- 5 / 5
- Polubienia
- 270
- Pobrania
- 835
- Wydruki
- 51
- Wyświetlenia
- 3317
- Oceny
- 47
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench!
(Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool)
Attaches to a IKEA Skadis pegboard or to anything ferromagnetic like the body of the CORE One:
The main magnetic file has holes for up to eight 6mm by 2mm magnets (commonly used in Gridfinity).
I've also provided few different files for the most common circular magnets sizes. If the size of magnets you want to use isn't available, the provided Fusion file is fully parametric!
I personally glued in my magnets, but if you want to try for a press-fit, clearances are also parametric.
Print settings
For the magnetic versions, there's nothing to look out for, defaults are fine!
For the Skadis version, supports are required for the top peg.
Use the Paint-on supports tool with the “Smart fill” tool type, and select the bottom surfaces of the top peg, like this:
Make sure your “Supports” parameter is set to “For support enforcers only”! The result should look like this: