Magnet Pole Finder for Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet Pole Finder for easy alignment and polarity detection of magnets during installation.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 26
- Wydruki
- 2
- Wyświetlenia
- 245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The Magnet Pole Finder was designed for Ø10 × 5 mm magnets, as this is one of the most commonly used sizes in 3D printing projects.
To use it, you first need to install one magnet with the correct orientation. The polarity of this reference magnet can easily be determined with a compass or a compass app on your smartphone. I use Physics Toolbox Sensor Suite, but many other compass apps work just as well.
Once the reference magnet is installed, the Magnet Pole Finder can be used to determine the correct orientation of additional magnets. Simply bring the Pole Finder close to a magnet, and it will automatically align itself in the correct direction. This makes it easy to glue or press magnets into parts with the proper polarity.
Although the Pole Finder was designed around Ø10 × 5 mm magnets, it can also be used with many other magnet sizes.
Printing Notes
The printing material is not critical. I printed mine in PLA, but PETG or other materials work just fine.
For better appearance, I printed the top and bottom sections in different colors. This is purely cosmetic and not required for functionality.
The Ø10 × 5 mm magnet already fits quite tightly in the model. After verifying the polarity with a compass, I glued the magnet in place to ensure it stays securely fixed.
Feedback Welcome
If you have suggestions, improvements, or new ideas, feel free to get in touch.
Best regards,
Mike
emkatech.ch
Happy printing and enjoy perfectly aligned magnets!