Liczymy pasujące modele…
Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…
Done during the Covid pandemic. Take a look at the pics, it's all there. There's a OpenSCAD file available. Print it and use it! Stay safe.
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
3D Printing Cost & Profit Calculator - Comprehensive Excel Tool for Makers and Businesses Take control of your 3D printing expenses and profit margins with this easy-to-use Excel sheet, specifically designed for 3D printing enthusiasts,…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
“In the mist of chaos, there is also opportunity” - Sun Tzu In the chaotic world of 3D printing where things can sometimes appear to be random or out of place, we, the makers & designers, have the job to still manage to see through all…
A bit of meaning and inspiration: This trophy design embodies the ambition and teamwork that propel the 3D printing industry forward. At its heart is a sculpted hand reaching toward a framed Earth, symbolizing the industry’s commitment to…
This model consists of a trophy and a silver plate with text. Printing recommendation: 0,2 mm layer height, 20% infill, no supports needed.
This represents the aligned rectilinear fill, it is the always hidden part of a 3D print that is highlighted on the trophy. Shading with the year 2024
Modern Decorative Candy Holder: Textured Design for 3D Printing This candy holder has a stylish, textured design that combines elegance with functionality. Its wavy, semi-translucent appearance, especially when made with transparent…
No supports, but requires changing of colour in some layers.
This is my entry for the 2024 3D Printing Industry Awards Trophy competition. The two parts are essentially the same shape with the metal one fitting into the larger 3d printed part and being able to rotate freely. This means the trophy…
This is my entry into the 2024 3D Printing Industry Awards design competition.
Now that my son is old enough to start learning CAD we created this entry to the 3D Printing Industry Award. Well aware that we are not “up there” with the real CAD designers this was a fun project to do with my son and passing on my…
4mm Thread Pitch, custom thread design that I used to better understand threads and bolting. Rather than try to copy a thread pitch optimized for other manufacturing methods I put some thought into optimizing for FDM printers. When I…
I printed LOVE23DPRINT's Flexi Rex for a friend and immediately got asked for MORE - but found out that they didn't always print reliably, the smaller parts coming unstuck from the bed and shifting about ¼ of the way through the print. I…
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
I have seen various tool organizer designs, but they were all kind of huge, or bulky, and were designed to hold a wide variety of tools. They looked like they would eat up a ton of filament to print. I wanted a simple organizer or caddy…
The Extrusor with integrated filament sensor by Comunidad Maker 3D (or any filament sensor that drags on the filament) has a problem with flexible filament. The extruder will pull the filament through the sensor just fine, but retraction…
Make this Easter special with the Cute Bunny Egg Screw Top - a fun and festive 3D printable container perfect for gifting treats, vouchers, or a little surprise! The bunny’s adorable ears, arms, and legs add a playful touch, while the…
These are simple punches for tapping in inlays in 3D printed and wood objects, and for tapping together tight fitting pieces. There is a wider square-tip option and a thinner round-tip one. They are 75mm long. I made them just big enough…
Description: This is a 3D model of an EGI 3.0 (90 mm) squid jig , designed for both shore and boat fishing. Perfect for anglers who enjoy making and customizing their own lures. What’s included: STL file of the jig body, ready to print…
Printed these on their flat side for best strength. These are only as good as the material and process you use. Do not use 3d printed parts for overhead or critical loads.
This is a cool “3D Printing Pro” badge sort of thing that you can attach to your hoodie, Jacket, Or sweatpants. If your poor like me and can't afford a multicolor printer I made it with parts so you can just slide them in (I hammered them…
Hello everyone! Excited to share a glimpse into our latest creation: Articulated Scalemail Lingerie. This unique piece, handcrafted with precision and care, embodies a fusion of medieval allure and modern flair. Designed with cosplay…
Universal holder for 4 printing plates and accessories. Placement on the right or left side. Holder length 220 mm. Printing without supports.
Just a simple tag commemorating Open Sauce 2025. Two options are available; emboss or deboss. Print in any multi-color material. Prints in under 14 minutes; Measures 73 x 43 x 2 mm. Use it on your back-pack, luggage, keychain or anything…
If you like chess and decorations this Decorative .STL model, an oversized chess pawn, ideal for 3D printing is for you. It's tested and repaired. The model has solid walls and is hollow on the inside to reduce filament consumption.…
Model Overview This download includes two versions of the articulated Red Panda: Multi-part version designed for single-color printers with post-assembly . One-piece version designed for multi-color printers Multi-part version where u can…
Disclaimer: Please don't expect this to be a “download-and-drop-in” modification that immediately works. Getting TPU/Flexibles to work reliably during a true multi-material print is tricky and will required understanding of your machine!…
Printing press made from printed parts, B52 Unistrut with 3/8" fasteners, 3/8" threaded rod and nuts, as well as M8, M5, and countersunk M4 screws, 4" polished steel conduit, standard 608 “skate” bearings, and a linear slide rod i had…
its a tool organizer and has a holder for wire and a mount for a custom lamp
Route 66 keychain with the keychain inserted mid print. Its a strong design. I encourage you to implement this design into your keychain ideas. I have included the Fusion model for you to modify as you need. You pause the print just…
I designed this to replace a removable 34 ¾" x 17 ¼" basement window in my creation room. I have included the model files so that it can be adapted to windows of any size. This has two 1/8" slots for the glass/plexiglass to slide into. We…
I was making an extension table to a trade show display, and I needed some legs with adjustable feet to level it, so I drilled some holes, put in some threaded inserts, grabbed some ¼"-20 bolts, and printed these feet to go on the end.…
🔥 All models. One price. Join us on Patreon 👉 https://www.patreon.com/c/FlexiMania_ Bring anatomy to life with the Flexi Human Hand Skeleton – a fully articulated 3D printable model of the human hand bones. Designed to move naturally at…
3D Pen Desktop Station: Organizer with 8 Mini Spools & Utility Box Keep your creative workspace tidy with this all-in-one 3D Pen Station. This set is designed to manage your filament colors efficiently and keep your tools organized in one…
Overview of the Printing Tool Introducing a compact yet highly efficient printing tool designed specifically for quickly handling tape, stickers, and similar adhesive items. This small gadget is ideal for those who need precision and…
you need bridgemode prints without support as you see Ender3 Layerheight 0,15 Painted with valejo Colors Have fun PLEASE see the other stuff here
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
I made it for reference on another project ... raffle ticket lid coming soon. The cup walls are just 0.3mm so even if you do try to print it will likely be very weak and not at all watertight ...
MY HEART IS YOURS symbolic 3D printable sculpture features two hands (male & female) gently holding a heart together from below , representing love, care, trust, protection, and emotional unity . The design focuses on soft, natural hand…
This is a sample project for the printing_only_supports.py script. The script modifies G-code files by stripping out the object-related lines while preserving the support structures. This allows you to print only the support material. A…
prints in all sizes and all layers HAVe fun use prusament Marble for a good looking without paint PLEASE see the other miniatures i made TO support the Education ART-Center
prints in all layers use bridgemode for the open door YOU can simply get a Upperfloor it is made for clamp in SECOND LEVEL Half Full or edge only for better Performance HAVE FUN PLEASE SEE THE OTHER STUFF HERE THANK you for beeing liked
Lid Assembly Instructions With the lid upside down, insert the inner and outer linkages. The orientation of the outer linkages matter. One face is flat, while the opposite has a slight taper. The flat side should be against the lid. The…
Decorative or prototyping piece that visually simulates the printed circuit board (PCB) of the AirGradient ONE air quality monitor. Designed for 3D printing, this replica reproduces the dimensions and component layout of the original PCB,…
The soles on some old shoes had worn down to the point of literally falling off, but we wanted to get more mileage out of them (and 3D-printed replacements sounded like a fun project). I took a picture of the bottom of the shoe, imported…
Building Brick STL Generator Parametric generator optimized for FDM 3D printing (compatible with common bricks). Recommended PETG Settings For fast results with PETG, use these PrusaSlicer settings: Setting Value Profile 0.2mm SPEED…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) HEART BOOKMARKS COLLECTION…
Skadis Vertical Cable Channel -optimized for 3d printing without supports-
prints fast 36min on a ender3v3 NO support needed at 0,15 layer paint with airbrush just brown and green Have fun PLEASE see also the other stuff for TTRPG https://www.printables.com/@Magig_I3Prusa/models
Add a little love to every bake with my heart-shaped 3D printed baking forms. Whether you’re baking for Valentine’s Day, weddings, anniversaries, or everyday treats, I hope you will make it for or with your loved one!
This is a remix of the excellent essenstar Spire's End Organizer made specifically for the smaller retail box released in 2023. Changes made: Scaled down the width and height of both the card tray and token tray so they fit the new, more…
The 2nd model is not exactly like the picture because there are improvements. The idea is to make it as easy to print as possible without support elements and many curves, but to be functional. There is space for a flash drive, SD card,…
Introducing the latest innovation in ticket scratching technology: a small, fast printing tool specifically designed to enhance your ticket scratching experience! This versatile tool, currently in its third iteration (V3), offers a modern…
it will print without support use bridgemode paint as your Game maincolors HAVE FUN PLEASE SEE THE Other Stuff her in my account
Funny 3D Printing sign to give your friends & family fair warning! Mounts on a wall or use the stand to display on your countertop. (You can just cut the tab off the top if you are going to display on a countertop.) Sign measures 9" wide…
Funny 3D Printing sign to give your friends & family fair warning! Mounts on a wall or use the stand to display on your countertop. (You can just cut the tab off the top if you are going to display on a countertop.) Sign measures 9" wide…
I simply added space inside the shaft to create additional thread reinforcement (roller-71 & 75).
The world is on fire. Everything’s broken. Nothing makes sense. So anyway… I’m 3D printing. This sign is for anyone who deals with chaos by ignoring it and making plastic things instead. Printer screaming, room slightly too warm,…
This remix is just a 3mf version of the original, with multiple plates and some configurations in place for better/easier printing. Notably: Multiple plates. The first plate has six parts, the second 10 clips, and the third one the top…
Cone for impriting scent for nosework, detectin dog and other types of search dogs.
Debianopolis! Debian logo and some buildings ;) Agora vocês têm um lugar para se encontrar e falar de Debian! Debianopolis! https://www.youtube.com/live/QjBWA7Qe1mw?si=60gU4WE7ipGM_zP2&t=8019 Print Settings Printer: Sethi3D S3X Rafts: No…
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled Full disclosure - I have not printed this part, nor do I have a DS2000 to try it on. I designed…
This 3D printable filament spool (plan version) is specially designed for use with FLEXX3D filament refills. It allows users to print their own durable and reusable spool, making it easy to use refill packs and reduce overall filament…
i've made this filter to reduce armfull thing produced by FDM printer like PM (particulate matter) and VOCs (organic volatile compounds). This filter reduces bad smells from the printer and common air dust too. You can also use it without…
See how it works: Please note: if you encounter problems printing TEST 1, print TEST 2_CUBE instead. It will definitely work. Procedure: To create the mesh of the plate before printing using Orca Slicer , follow these steps (see the…
I do most of my 3D parts cleanup/assembly while sitting on the couch in the living room. I needed an organizer to put on the coffee table so I don't have tools scattered all around. It has spots for the tools I seem to use the most. I'm…
Introducing a compact and efficient protective case designed specifically for easy access to quarters. This innovative design not only allows for quick retrieval but also ensures that your coins are kept safe and secure. Perfect for…
The fast printing rack is designed to hold up to 8 quarters, offering an efficient way to organize coins. It ensures quick set-up while keeping coins protected from damage. This practical accessory is ideal for anyone seeking a convenient…
This model is a guitar-shaped guitar pick holder that prints fast, does not need any sorrports works on almost any pick. If you like the model, consider giving a tip to support Fonn Prints and help us with future models and more!
Presenting a sleek and efficient protective case specifically designed for easy access to pennies. This innovative design allows for quick retrieval while ensuring your coins remain safe and secure. It's perfect for organizing your change…
Presenting a sleek and efficient protective case specifically designed for easy access to nickels. This innovative design allows for quick retrieval while ensuring your coins remain safe and secure. It's perfect for organizing your change…
Presenting a sleek and efficient protective case specifically designed for easy access to dimes. This innovative design allows for quick retrieval while ensuring your coins remain safe and secure. It's perfect for organizing your change…
Picking the right layer height makes or breaks your prints. Here is a quick guide to choosing the best layer height for every situation. **What Layer Height Does** Layer height controls how thick each printed layer is. Thinner layers…
## Crystal Dragon Hoard - 5 Premium 3D Models 5 unique crystal-textured dragon statues, each designed for easy FDM printing. Ice, amethyst, jade, ruby, and obsidian variants - stunning display pieces. ### What's Included - **Crystal…
## Space Explorer Desktop Set - 5 Premium 3D Models 5 space-themed desk organizers combining form and function. Astronaut pen holder, rocket phone stand, moon dish, Saturn cable organizer, and space helmet headphone stand. ### What's…
## Enchanted Forest Spirit Collection - 5 Premium 3D Models 5 whimsical forest spirit figurines - mushroom creature, owl guardian, ancient treant, kitsune fox spirit, and crystal fairy lantern. Enchanting display pieces perfect for gifts.…
I took the 4040‑extrusion screw‑mount section from the Ender 3 Pro Y/Z tensioner and merged it with the anti‑crossthreading horizontal‑printing screw mechanism from Thompson Studios’ remix. The 4040 screw hole and mounting geometry were…
Better working arrows for this model... > The arrows are sharper and penetrate targets more effectively! Print Settings Do not use supports. Print at a slow speed: 70% for PLA 60% for PETG. If you like the model, consider giving a tip to…
This is a 3MF remix of the transparent test model originally created by CNC Kitchen. The included 3MF files are configured for transparent PLA printing, with cooling disabled to improve light transmission and reduce internal haze. I…
Size: 50 mm x 50 mm — but you can scale it up for more impressive wall logos. Filament swap: 68% Extras: A blank version is included for remixes. instruction step 1: choose a color for the logo background step 2: print the sign up to 68%…
Skateboarding mini ramp design. Not for printing.
A clean and contemporary wall clock designed in Fusion 360, featuring a smooth circular face and a separate decorative element that is printed independently and glued onto the base. The model includes the clock face, the central…
This 400 ml drinking cup was designed specifically for easy and reliable FDM printing in PETG. The shape is slightly tapered to improve printability, part stability, and everyday usability. It prints upright without supports and has a…
For details, please refer to our project website .
big time credit goes to JN printing because i got the idea from his model and use some of his parts in it: (i had to put a different model because i can't paste the original link) parts used by me that were his: half of stator/horn ring…
Lens cap for a children's camera with thermal printing. https://a.aliexpress.com/_EIbA1h6 ----- bore diameter 27.8 mm
Dopravne znacky cca 6cm, postupne budu pribudat, modely su urcene na multicolor tlac. Traffic signs approx. 6cm, will be added gradually, models are designed for multicolor printing
