1x2 Short Vase Mode Gridfinity Bin With Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shorter, simple vase-mode bin to hold things such as screws
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 562
- Wydruki
- 3
- Wyświetlenia
- 2251
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional to use, and a STEP file is also included so you can make changes.
Use the included gcode file for Ender 3 series printers to save you the hassle from finding the right slicer settings. But if you want to slice them yourself, Ive found that using 28 bottom layers, and extruding 0.8mm perimeter width on a 0.4mm nozzle worked for me in Prusaslicer.
1x1 Version Here: https://www.printables.com/model/443690-1x1-short-vase-mode-gridfinity-bin-with-magnets