RAT RIG VCORE3 Spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super fast spool holder and filament guide
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Super Speedy Spool Holder and filament guide for the RatRig V-core3.
It's mounted behind, above the electronics, the design does not interfere with the belt path.
Super simple design mounted to the frame with M6x12 cap head screws and M6 3030 inserts.
2 screws and inserts needed for the SpoolHolder and 2 for the filament guide.
The filament guide has tight tolerances and needs to be drilled after printing.
Use a 2mm drill for the hole that guides the filament and a 4mm drill for the hole that accommodates the teflon tube (wich is going to be pressed in).
Printed on Ender3 Pro in PETG:
0.2-0.3 layer height
60 mm/s (everything except first layer)
80 mm/s infill
10% infill
15% part cooling fan
4 perimeters
4 top/bottom layers
Should take around 2,5 hours for both with 0.3 layer height.