RAT RIG VCORE3 Spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Super fast spool holder and filament guide
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 517
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Super Speedy Spool Holder and filament guide for the RatRig V-core3.
It's mounted behind, above the electronics, the design does not interfere with the belt path.
Super simple design mounted to the frame with M6x12 cap head screws and M6 3030 inserts.
2 screws and inserts needed for the SpoolHolder and 2 for the filament guide.
The filament guide has tight tolerances and needs to be drilled after printing.
Use a 2mm drill for the hole that guides the filament and a 4mm drill for the hole that accommodates the teflon tube (wich is going to be pressed in).
Printed on Ender3 Pro in PETG:
0.2-0.3 layer height
60 mm/s (everything except first layer)
80 mm/s infill
10% infill
15% part cooling fan
4 perimeters
4 top/bottom layers
Should take around 2,5 hours for both with 0.3 layer height.