UPDATED! Outside temperature display suitable for w201
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UPDATED! Plastic trim piece suitable for the outside temperature display (ATA) suitable for w201
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 138
- Makes
- 0
- Views
- 1,611
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATED! WIP!
Plastic trim piece suitable for the outside temperature display (ATA) suitable for w201, w124, w126
Basically an almost 1:1 with the real part, save for a few unnecessary angles.
Added 4 different models, full versions and split body versions to make them easier to print.
“ATA_FULL” and “ATA_SPLIT” are the main models with respectively the unsplit and split sunshade models
“ATA_W_DISP_FULL” and “ATA_W_DISP_SPLIT” are models for a personal project to add an electronic speedo using a 4-digit 7 segment display I stole out of an old radio. The display has no writings on them so this is about all information about it that I can provide.
Enjoy and share the W201 poison!
Printer settings:
- Slicer: Prusaslicer
- Printer: Watercooled Ender 3 V2
- Filament: ASA natural
- Chamber temp: 55C
- Bed temp: 120C first layer, 116C other
- Nozzle temp: 265C first layer, 255C other
- Other settings: 0.2mm nozzle, 20mm/s speed, 250% first layer width
Credits: cover image taken from https://www.marceldeijkers.nl