UPDATED! Outside temperature display suitable for w201
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATED! Plastic trim piece suitable for the outside temperature display (ATA) suitable for w201
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 1611
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATED! WIP!
Plastic trim piece suitable for the outside temperature display (ATA) suitable for w201, w124, w126
Basically an almost 1:1 with the real part, save for a few unnecessary angles.
Added 4 different models, full versions and split body versions to make them easier to print.
“ATA_FULL” and “ATA_SPLIT” are the main models with respectively the unsplit and split sunshade models
“ATA_W_DISP_FULL” and “ATA_W_DISP_SPLIT” are models for a personal project to add an electronic speedo using a 4-digit 7 segment display I stole out of an old radio. The display has no writings on them so this is about all information about it that I can provide.
Enjoy and share the W201 poison!
Printer settings:
- Slicer: Prusaslicer
- Printer: Watercooled Ender 3 V2
- Filament: ASA natural
- Chamber temp: 55C
- Bed temp: 120C first layer, 116C other
- Nozzle temp: 265C first layer, 255C other
- Other settings: 0.2mm nozzle, 20mm/s speed, 250% first layer width
Credits: cover image taken from https://www.marceldeijkers.nl