Counting matching models…
Waterproof (when using a silicone seal) Without nuts (tapered holes) Inside the mounting posts Variant hinge/clip only Need only M3x 30mm screw, twice for each clip Also published here
I just needed a replacement key for my outdoor utility cupboard for my electricity meter now I am having to do weekly meter reading got tired of using my fingers to unluck the door. If you print, please share a make, and let me know that…
Simplify your technical drawings with this handy 3D-printed hole and radius template! Designed to replace the often frustrating compass, this template provides accurate and consistent circles and radii without the issues of blunt points…
Designed for a DIY Accelerometer Trigger for the LabRadar Chronograph Trigger housing has a cylinder for the trigger assembly and a hole for the wire to exit. A velcro strap slot allows for securing mounting without a picatinny rail. Also…
update:8/9/2026 I had a request to add screw holes as an option for assembly so I decided to get that done now. I used M2.5x8 screws that I had laying around in my box'o'junk so that is what will work best for assembly. Hole is 2.25mm so…
Simple-ish model to mount various compatible accelerometer board to the Sprite extruder pro! Made it in 2 pieces for ease of print & potential modularity, some assembly required though. Mount tested with ADXL345 (GY-291) & MPU-6050…
I create follow model to store my Prusa accelerometer Set on easy way. In process of creation I fold the connection wire naturally and store the Accelerometer in upper position. The model is printed with 0.2 mm height and 0.4 mm nozzle…
Tethered caps for sharp needle type multimeter probes. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.12mm Infill: 100% Filament: Any TPU Any Category: Electronics
This is still a work in progress! I haven't gotten a chance to actually cut this (waiting on parts/time) yet. Putting it out there anyway. This is a Control Panel for the K40 Mini (the 30w, smaller version) that incorporates a…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
Bracket for the La Crosse TX145R rain meter. May fit others with similar size. Designed so the rain meter sits securely and to allow water to drain easily. Secures with 4 screws (I suggest deck screws as they won't rust). You absolutely…
This covers the top of the rails of my 20' Louisville extension ladder. I printed it in TPU to stop the ladder from scarring the house. The openscad file has been parameterized so that the width, height and depth can be adjusted to fit…
I recently built the LACK enclosure for my Prusa Mk3S. As I decided to leave the power supply mounted on the frame and not move it, I wanted to add a thermometer to the enclosure, to check on the inside temperature. I found a lot of…
The STL file is designed for Galaxy S20+ for other phones and chargers you can customize the attached cadquery code.
The Input Shaper needs to be calibrated from time to time. This is necessary after changing the installation location, adjusting the belt tension, or changing the area around the Nextruder.
About This gridfinity holder is designed for the Braun thermometer. Print instructions Based on one print run: PLA, 0.2 mm, no support.
I have seen different Hygrometer mounts and decided to make my own. 2 versions because the hex hole is offset. One version of the mount can be placed 60degess offset if that is what is preferred or my preference is to view the…
Models to print a new replacement grip for the handle of a Comptometer and for a new reset button. After printing, sand smooth and paint, two or three layers will create a shiny smooth surface. Because the finished item should have a…
EDIT (2/10 3:56PM) : The Thingiverse Customizer is being cruel to me today, I have no earthly idea why, but when it renders my object it screws up the tickmarks for the hours and minutes of the day. I'm going to keep banging my head to…
Summary This design was inspired by the Aten Heliochronometer Sundial, model B4003, designed and built in the 1990’s by the craftsman J.D. Gard of Tucson, Arizona. It’s a beautiful instrument made out of brass and aluminum, and it claimed…
This is a frame for a 30mm filter mat. Filter dimensions are 50cm height and 20cm diameter. The needed mat size is about 50x60cm. The parts are printed in PETG and glued together with hot glue. OpenSCAD files attached. A smaller version…
This is the 170mm diameter version from my bigger filter: https://www.printables.com/model/1030245-hamburger-mattenfilter-frame-200mm-diameter The needed mat size is 50x50cm.
Summary With a simple modification to the analemma plate, you can convert your Earth-based heliochronometer into an accurate Martian sundial using one of these Printable models: Planetary Geared Sundial/Clock Hybrid - The Best of both…
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…
I made the adapter to fit the hygrometers that I routinely buy from Amazon that are used in my dry boxes. There are two files, I am using the one for ABS. The other one is tighter and may work better in pla. I included both step files if…
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
A Prusa gyorsulásmérő doboz könnyen nyomtatható. A fedél kétféleképpen készíthető, felirattal vagy anélkül.
I decided that the clip on filter covers were a good spot to place a cheap hygrometer I had laying around. I am using it more as a chamber temperature sensor. There is a bottom or top mount for the cover. Cover should fit any of the…
Mad a little Gridfinity holder for the 7 Function Multimeter from Harbor Freight.
Lightweight ruler holder that can be screwed into a wall using M3 countersunk screws. Inspired by this Model by HolzerMax and adjusted to my smaller ruler.
Reoriented Y mount to maintain accel orientation
This model was created to hold nine 10ml Schott vials with 22.75mm diameter. Use stick on rubber feet to keep it from sliding around, works great on shaker table.
Vacuum bags are great for storing filament but they're notoriously fragile and can easily be punctured by sharp edges or wear out due to over-stretching. I've also included versions with a hole in the center to hold those round generic…
Use M3 x 10 bolts try to use flatter heads on the bolts for easier usage. The Indented version is for my specific hot end that I printed so you may only need it if you have the same one.
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive. Re-use…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the round Hygrometer, there is one available for the…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the rectangular Hygrometer, there is one available for…
Next to my bed I dont have space for a nightstand so I designed this glassholder for urgent water needs in the night. :D It is meant for rather big glasses (e.g. 0,5l beer glass). It is mounted with 3 screws which are hidden on the bottom…
Thanks to the ears the silica gel container fits to any spool width even if it is less high than the spool width.
Minimalistic holder for the Parkside Multimeter to Ikea Skadis pegboard
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
Its designed for a tube from Aquael that has 22mm diameter. Tolerance is 0,5mm to fit well
Gridfinity holder (2x4) for the aneng AN8008 multimeter. I have printed it with 0,3mm Layerheight - everything fine.
Simple modification du modèle de Stanley (lui-même remix de l'excellent modèle de hexvolt ) afin de faciliter l'impression, sans support. Imprimé en PETG transparent pour visualiser la couleur des billes de silice. Print instructions: 4…
It took me over a year to finally stop procrastinating and model up a bin for my Klein Tools MM400 Multimeter. The thing is just so hard to measure. I tried scanning it a few times but was never happy with the results. I finally decided…
By attaching it to the hinge, the position of the thermo-hygrometer can be varied. This way, you can measure the temperature at the upper or lower hinge without needing any additional mounting holes. Suitable hinge:…
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
A simple tool to help assembly and disassembly SRAM Rival/Apex/Force AXS Power Meter (QUARQ) from the crank. 2026-FEB-14 Update: V2 Release: The updated model features an improved fit and an additional lever function, allowing you to pry…
What is it? The Floppy Voltmeter Clock is a special clock that instead of using the usual rotating hands, or seven-segment displays in the case of digital clocks, uses two analogue voltmeters in a retro style. It is therefore a unique and…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
Hi. I've designed a vent cover for GetFort rack. I'm using this rack as an enclosure for my printer. This vent cover design is meant to protect inside from dust and trap heat in. The vent lid is positioned on top of a base using a single…
This is my attempt to the ongoing contest. It is a small prusament spool bead with 4.5 mm holes. I could use some extra prusa meters :D
Adapter with support base to the Govee or similar shaped Hygrometer and Thermometer. With this hygrometer/thermometer you can monitor the temperature and humidity inside ACE pro remotely via Bluetooth, receive notifications for changes,…
This is a simple bracket that allows you to mount your AstroAI multimeter in any type of clamp. This was created for the DM2000, but should work for other models
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
— English Version below — Bob Marley Perlen – Ein Hauch von Frieden und Musik Beschreibung: Diese 3D-gedruckten Perlen sind eine Hommage an die zeitlose Musik und die Friedensbotschaft von Bob Marley. Trage ein Stück Legende bei dir und…
This is a stackable Gridfinity bin for the Peaktech 2025 multimeter. In the lower section there is enough storage space for all the accessories included with the multimeter. The bin fits the standard 42 mm grid and has a size of 5x3x10.…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
After some time designing and field testing, here we are! 02/24/2026 UPDATE: Added low rate yellow meter. I printed these in TPU 95A: 6 perimeters 30% Cubic infill Check “Avoid Crossing Perimeters” to ensure no stringing and a smooth…
Eta battery vacuum cleaner reductin nozzle to 32mm outer diameter 2 versions (both is simmilar, but v2 has only different geometry) outer diameter is 31,8mm for better compatibility Print settings 0,2mm layer 4 walls no supports use outer…
Vacuum cleaner nozzle (inner diameters 32-35-36mm) Print settings 0,2mm layer 4 walls no supports use outer brim min 10mm
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm) I created this bowl holder because our old cat doesn't have many teeth left, and when he licks kibble and food from his bowl, there used to be a mess around the feeding…
LED thermometer build guide. There are two versions of this thermometer. An LED illuminated bars Type and an open strip LED type. Both have the same software installed and a photo cell to control the LED intensity.
Ended up with someone's unwanted multimeter, but but it was missing its battery cover. I modeled a simple replacement cover. It lacks the kickstand functionality, but it's so much better than the piece of duct tap that was holding the…
please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
I purchased this PCIe to SATA adapter card, not realising that the built-in fan is extremely loud. The 3d printable bracket uploaded here allows for attaching a potentiometer to the card, in order to vary the fan speed. I am using a…
If you want to learn how to remix models you can find on printables.com or how to prepare them for 3D printing with Autodesk Fusion, check out my book: “3D Printing with Fusion 360” on Amazon: https://a.co/d/5ztftox Packt website:…
Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.
I was frustrated with the hygrometer always being hard to find & see inside the vacuum bag when checking values. That's why I designed my own. Does not stay in the filament spool by itself! Is held in place by vacuum bag. Verified with…
The original 2025 heliochronometer sundial reads time between 5:30AM & 6:30PM. This is due to the crescent main dial which limits the mechanical movement of the alidade. The original design is available here: Accurate Heliochronometer…
Has the seal of your flowmeter's poppet assembly failed? Disappointed that the only solution seems to be a new assembly part or a rebuild kit for half or more of the cost of the unit itself? Dig out that failed elastomeric compound and…
This hygrometer stand is designed for 45 mm diameter circle hygrometer models that have retaining clips at a 35 degree offset. The objective of this project was simply to design a stand for the hygrometers that I purchased off of amazon…
This is a 3D printable pipe connector designed for pipes with an inner diameter of 150mm. The model is ideal for joining two pipes securely in various applications, such as ventilation systems, ducting, or custom piping projects. The…
v4 of the Ryden Bikes measuring tool was remixed to fit a meter stick - ruler easily obtainable at Amazon US: https://www.amazon.com/dp/B00KQ6AENG The meter stick is 5.5mm x 28.5mm thick. The BB piece was resized to fit snuggly. The…
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
A compact stand to securely hold a moisture and temperature meter. Designed for 3D printer AMS units, but equally useful as a standalone sensor holder for home, office, or workshop environments. Keeps readings visible and stable without…
The Decathlon rear view mirror 520 (ref 8600893) didn't fit my bike (and many people's bikes judging by the product reviews on Decathlon's website) as the internal diameter of my handlebar is narrower than the mounting adapter provided…
Remix of PhilippSorenses's remix of PsychProd's original. I had the small issue, that my silica gel beads / pearls were uneven in size and sometimes broken. That led to a lot of them falling through the main container's wall. I slightly…
Edit: Since Prusaslicer cant remesh negative objects I brought the top into another CAD system to finish it, and so the top now has correct holes. This model has been great for my guitars but I kept having trouble getting consistent clean…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Knob designed back in 2017, for “press fit installation”, skipping the need to add a blind screw Compatible with other D-shafts wattmeter designs Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,2mm…
I made this to help the battery last longer in your Olympus 35 SP - by covering the light meter, the amount of battery drain is minimised. I used some sticky-back tape to stick it to my camera. The door is inserted from the back - the…
The original knob broke off, so here's a replacement for that :) In my experience the screw part is strong enough that it doesn't break off, if it does I guess just print out a new one → add superglue onto the surface of the inner…
A spool holder for the Core One with a larger diameter, to prevent the spool scraping the printer case as it revolves. A screw-on end cap is added to prevent the spool being pulled off, which occasionally happens when the reel is coming…
There are plenty of different mods for the larger creality tent enclosure, but the one I bought has 8mm rods and different connectors than most of the mods that have been desgned & uploaded.…
With an area to mark the contents. Holds tight.
This is a simple hydrometer, humidity meter, holder using three 8x3mm magnets. You can replace the hydrometer battery without removing if from the holder. You can use any material to print it. I used PETG. Hydrometer:…
Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…
A small kids toy with no other function than to boost imagination Designed to be printed flat without supports except for the hand's arrow
IKEA FANTAST Thermometer has a long cord for its metal probe. In my kitchen, it was always an unruly bit of clutter. Here is a simple print to keep thermometer and its cord and probe together until it is time to use them. In the…
Dashboard for powerbutton, voltmeter & usb ports. For Vfr 800 non HISS key bikes.
