1 / 5
Single-turn to Multi-turn potentiometer mod cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mod to convert single-turn potentiometer to Multi-turn
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive.
- Re-use the original trimpot on your board so you have the exact value needed, no need to buy a potentiometer with that value again
- Re-use any potentiometer you have laying around as its value doesn't matter for this mod
Cannot find a way to make a strong latch that doesn't snap-off when assembling so I've added 2 holes for securing with zip-tie or metal wire as pictured. It actually snap on, but can be shaken loose with enough force so I recommend doing this.