1 / 5
Single-turn to Multi-turn potentiometer mod cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod to convert single-turn potentiometer to Multi-turn
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive.
- Re-use the original trimpot on your board so you have the exact value needed, no need to buy a potentiometer with that value again
- Re-use any potentiometer you have laying around as its value doesn't matter for this mod
Cannot find a way to make a strong latch that doesn't snap-off when assembling so I've added 2 holes for securing with zip-tie or metal wire as pictured. It actually snap on, but can be shaken loose with enough force so I recommend doing this.