Stratocaster Potentiometer Knob - Optimized for multicolor text and less support/waste
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cut and posts added to allow the top half to be printed upside down and with a higher layer height for quality.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 39
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit: Since Prusaslicer cant remesh negative objects I brought the top into another CAD system to finish it, and so the top now has correct holes.
This model has been great for my guitars but I kept having trouble getting consistent clean top surface quality and especially sharp looking text for multicolor versions I made to look like authentic fender knobs. I had the idea to split the pieces up for optimal positioning and prusaslicer has the convenient connector addition function. I trimmed the tops of the connectors .5mm to help with tolerance, but I recommend using a soft clamp and a little glue to ensure a seamless fit. I also recommend .15mm layer height for bottom with arachne and .2 for the top with classic for the lettering to look clean.