Stratocaster Potentiometer Knob - Optimized for multicolor text and less support/waste
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cut and posts added to allow the top half to be printed upside down and with a higher layer height for quality.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit: Since Prusaslicer cant remesh negative objects I brought the top into another CAD system to finish it, and so the top now has correct holes.
This model has been great for my guitars but I kept having trouble getting consistent clean top surface quality and especially sharp looking text for multicolor versions I made to look like authentic fender knobs. I had the idea to split the pieces up for optimal positioning and prusaslicer has the convenient connector addition function. I trimmed the tops of the connectors .5mm to help with tolerance, but I recommend using a soft clamp and a little glue to ensure a seamless fit. I also recommend .15mm layer height for bottom with arachne and .2 for the top with classic for the lettering to look clean.