Counting matching models…
This is a remix of https://www.thingiverse.com/thing:6792810 Shortened the depth of the ring to better fit the hygrometers commonly found from Aliexpress/temu. also removed some bulk in the legs to shorten the print time a bit. Thanks to…
I have seen different Hygrometer mounts and decided to make my own. 2 versions because the hex hole is offset. One version of the mount can be placed 60degess offset if that is what is preferred or my preference is to view the…
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
I made the adapter to fit the hygrometers that I routinely buy from Amazon that are used in my dry boxes. There are two files, I am using the one for ABS. The other one is tighter and may work better in pla. I included both step files if…
I decided that the clip on filter covers were a good spot to place a cheap hygrometer I had laying around. I am using it more as a chamber temperature sensor. There is a bottom or top mount for the cover. Cover should fit any of the…
Vacuum bags are great for storing filament but they're notoriously fragile and can easily be punctured by sharp edges or wear out due to over-stretching. I've also included versions with a hole in the center to hold those round generic…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the round Hygrometer, there is one available for the…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About Notice: This is for the rectangular Hygrometer, there is one available for…
Thanks to the ears the silica gel container fits to any spool width even if it is less high than the spool width.
By attaching it to the hinge, the position of the thermo-hygrometer can be varied. This way, you can measure the temperature at the upper or lower hinge without needing any additional mounting holes. Suitable hinge:…
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
Adapter with support base to the Govee or similar shaped Hygrometer and Thermometer. With this hygrometer/thermometer you can monitor the temperature and humidity inside ACE pro remotely via Bluetooth, receive notifications for changes,…
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
I was frustrated with the hygrometer always being hard to find & see inside the vacuum bag when checking values. That's why I designed my own. Does not stay in the filament spool by itself! Is held in place by vacuum bag. Verified with…
This hygrometer stand is designed for 45 mm diameter circle hygrometer models that have retaining clips at a 35 degree offset. The objective of this project was simply to design a stand for the hygrometers that I purchased off of amazon…
Remix of PhilippSorenses's remix of PsychProd's original. I had the small issue, that my silica gel beads / pearls were uneven in size and sometimes broken. That led to a lot of them falling through the main container's wall. I slightly…
There are plenty of different mods for the larger creality tent enclosure, but the one I bought has 8mm rods and different connectors than most of the mods that have been desgned & uploaded.…
This square mount is specifically designed for Thlevel model . The device snaps perfectly into the mount, staying secure while remaining easy to remove. Questo supporto quadrato è realizzato appositamente per il modello Thlevel . Il…
The clamp holds the hygrometer in a relatively convenient position. The included M8x8 T-bolt is good. The threads on my clamp are not, so the fit is tighter than it could've been. Dry-fit the T-bolt and tighten it just enough to hold the…
I printed the Hygrometer for AA Batteriy Case thanks to Mark for the nice stuff, but I missed the possebility to mount the part into my fillament storrage with the poeesbility to exchange the batterie. Therefore I designed two different…
I only use my Comgrow for one dedicated filament at a time. It is on a riser in the back of my setup and I needed a 90 degree angle mount to see the readings so I created this. I tried several threaded designs but ended up just going back…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
I have downloaded many models designed by others, and they have quite a few flaws—for example, requiring extra screws or having an inconvenient viewing angle. That’s why I designed this model. This is Thermohygrometer Casing 3D Model. No…
A simple holder for the round Xiaomi Bluetooth Temperature and Hygrometer to put it on any magnetic surface. 2 10x10x5 magnets are required
This is a 2 way (vertical or horizontal) side mount bracket for the typical round hygrometer that need a 42mm hole. Made this for use with the ezystorage 79-Quart Waterproof Clear Latching Gasket Tote I use for storing filament. (FYI you…
A simple way to attach a hygrometer to your filament dryer. I noticed the accuracy was not quite right on my dryer so I added this as a second check.
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Project Description Hi everyone! 😊 This is an improved Filament Guide specifically designed for the Anycubic ACE Pro . I’ve optimized the design to use less material for better transparency (making it easier to see the filament) and lower…
Magnetic Hygrometer Holder – Compact Mount for Containers Keep your humidity readings visible and secure with this minimalist magnetic hygrometer holder. Designed to fit snugly inside plastic bins, dry boxes, or any enclosed space, it…
Keep your filament dry and optimize your 3D printing results. This adapter holds a small rectangular digital hygrometer and enables you to monitor humidity levels at a glance without having to open the box. A simple mounting solution with…
Support for your filament coils that incorporates an integrated reservoir for silica gel balls and with a slot for a rectangular thermometer hygrometer with dimensions of 47.5 x 28.5 mm. It consists of three separate parts: The chassis…
Elevated hygrometer holder for the popular filament boxes from Aliexpress/Temu. The hygrometers that fit in the lower holder won't have good air flow there. Also, the openings of the hygrometer can be blocked by the plastic. Those are…
This is an all new model, inspired by the design by RealityTake2 . My model can be attached to the container lid either using small zip-ties or for a more finished look with 8 to 12 mm long M4 screws.The lip that the mount attaches to are…
This fits the inexpensive rectangular temp/humidity sensor from Amazon.
Printing without support. If the slicer complains about missing support, you can ignore it. The latch inside the housing has a gap of 0.2 mm. I used neodymium cylindrical magnets with a diameter of 5 mm and a height of 4 mm. The magnets…
Don't want to drill holes in your dry boxes? This magnetic hygrometer mount allows you to place your sensor exactly where you want it without compromising the airtight seal of your dry box. The mount consists of two parts: an internal…
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
A stand for the generic round hygrometers that can be found cheaply on aliexpress. Prints "face down" without supports. Note that this is only for the type with the locking tabs at 11 and 5 o'clock positions.
A little, fast printing mount to fit a 42mm circular hygrometer to the HSW system. Probably best fitted hanging over the edge to allow plenty of airflow around the meter. There are two models, with the insert at different rotations, for…
A print in place phone holder with a hole to fit a 42mm diameter hygrometer. Thanks to Gugalynn for the original phone holder design.
I got a package of four hygrometers ( like this , for example) and didn't want to keep them in their original boxes. Each came with a battery installed and a spare battery. I already had an LR44 tray, but since the hygrometer is too wide…
This remix alters the hygrometer lid to have relief slots in the mounting hole. Maybe it's a regional thing, but the round hygrometers I buy in the US have tabs that stick out which make them difficult to insert into a hole without relief…
For T-Nut 2020 fasteners, you can either print them or buy them
Mount for this hygrometer from Amazon: https://www.amazon.com/dp/B0F4R58YKD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 I use this to hold the hygrometer on the interior of my filament storage bins so the display sits flush with an…
Magnetic Holder for LCD Hygrometers with 3 Variants, that only changes the Magnets. 2 6x2mm Disc Magnets - The easiest to detach from for example the Fridge 1 20x6x2mm Magnets - Sticks better to Metal 2 20x6x2mm Magnets - Sticks the best…
Also have a look at my v2 of this model: Depending on the filament stored you can either print it in PLA or PETG. You need 2xM3 hex nuts and 2xM3 15mm screws (everything above 12mm should work). With this model you will not get any…
Good Display GDTHT019 E-paper thermometer and hygrometer is not designed to be placed on a table or shelf. That's why I created a model that allows it to be placed on a stand. The model is in two parts to make printing easier. The two…
Adapter to place the Hygrometer into the Lid, including PTFE outlet
This fantastic drybox has a gasket between the box and the lid but not for the hygrometer so i made my own.
Simple clip to mount your thermo-hygrometer directly onto 16 mm grow tent poles. Secure fit, clean positioning, easy to read. Use PETG for flexibility and crack resistance.
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the print. Tip: For a cleaner look, print it in PLA-CF. It offers a matte finish
Obudowa do termometru xiaomi. Obudowę można wykorzystać do pojemnika na filament. Simply drill two mounting holes in a transparent container and place one part outside and the other inside. Then, simply insert the thermometer into the…
I made this adapter to fit these together for filament drybox / storage: drybox link: https://www.amazon.com/dp/B0F8B8C9Q6 hygrometer link: https://www.amazon.com/dp/B0CHF98P26 These have been holding at 10% for several weeks so I'm happy…
These are my personal modifications to Robert Samples' " Side mount dry box for Elegoo Centauri Carbon with hygrometer" I printed the box a total of 3 times trying different things in order to get a good airtight seal. The first time, I…
This is a hygrometer /thermometer stand. To be printed as shown in the picture, laying down on its face. Material as you want, but make sure the filament is calibrated dimensional as it is a good tight fit, to hold the hygrometer in…
Other necessary material M3x18-20mm screw - 2pcs Round neodymium magnet 10x3 – 2pcs. Circular hygrometer from Aliexpress or similar.
Please also have a look at my v2 of this model: Everybody needs a nice hygrometer for the Chitu E1 boxes. Proper connectors (which do not slip in or out) are also almost a must if you print from the box. This model combines those two into…
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
Curved Hygrometer Holder for Modular Cereal Box Drybox A hygrometer holder for the Modular Cereal Box Drybox by joncruz that actually looks like it belongs there. Why another hygrometer holder? The existing holder by charno works, but its…
Holders for round mini hygrometers with matching cutouts. Suitable for use in the GunplaMark Filament Storage Box 2026. I use round mini hygrometers that have two clamping points on the back, aligned at a specific angle to the display. To…
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
A little holder for a 42mm (about) hygrometer, to fit onto openGrid Best hanging over the edge, top, bottom or side, for good airflow. Thanks to David D for the openGrid system Printed in PLA, uses 13 grams and takes about half an hour on…
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
This simple design allows you to snap in one of these hygrometers into the center of a filament spool so you can see it while your spool is vacuum sealed. Fits full size (1kg) spools, both cardboard and plastic. No special printing…
This beautiful hygrometer stand is perfect for placing on a table. Its design features curved edges that follow the contours of a circular hygrometer. Hope you like it!
I create a Version with FreeCAD for Redline Filament Spool.
Printed with 0.4mm nozzle, 0.20 layer height. No brim or support needed.
This is a CAD model of a Mini Hygrometer Thermometer (Digital Humidity Meter) that I designed in Shapr3D, based on a real product I own. It's a small indoor/outdoor humidity and temperature monitor often used in greenhouses, gardens,…
Add a hygrometer to your multi-spool filament dryer so you can monitor humidity levels and determine whether your filament is properly dried. Compatible with this model: https://s.click.aliexpress.com/e/_c4rtRbnf
I printed it face down with PETG 0.4 nozzle and 0.2 layerhight
This is version 2 of my printable jar with a cutout in the lid to insert a cheap hygrometer. It is fully printable, including the gasket. No tools are required for assembly. There are two models: one with the cutout and one without. The…
No additional fasteners are required. Print with TPU 95A and mount directly onto the 30×30 extrusion groove. The component can be repositioned vertically along the groove to the desired location for camera shooting.
Mini LCD Digital Thermometer, Hygrometer wall mount You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
Update June 12, 2023 A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs…
UPDATE 03NOV2023: The original location for the magnets did not work out as well as I had hoped. The bracket's weight causes it to slide down on the EMT conduit, making it hard to read in some applications. So I updated the model. I…
“New and improved” hygrometer holder to fit containers with a narrowing / groove. To make it more fun, I added a lable for the filament type. This is useful if you print mainly in the same colors but different filaments. Use manual color…
If you want to seal up a spool of filament with a hygrometer display in a vacuum bag, where do you put the display? At first I thought of mounting it in the spindle hole, but my filament spools all have solid tubes for the spindle hole so…
A Holder for Mini Hygrometer / Thermometer with 45 x 26 mm. Ein Halter für Mini Hygrometer / Thermometer mit 45 x 26 mm. Best Printing with Face down. My print is not so good, sorry. Printer was not calibrated and fast print used. If you…
Hi, I present to you my universal hydrometer holder is suitable for anchoring to metal structures. I use it in the basement to monitor parameters, where it is anchored to a metal shelf and can be easily moved. Another use is at my 3D…
Just a simple mount to allow you to mount and swivel a thermometer/hygrometer so it can be viewed. Needs m3 x 10mm screws and m3 x 20 screws for the different connections and either an m3 heated nut insert or an m3 nut depending on which…
I had some old hygrometers laying around that I did not want to see go to waste. So when I printed this awesome model years later, I modeled a quick case to get my hygrometers to fit in a rectangular cutout. Instructions Print the two…
Simple remix of an already good model. The holder shouldn't need air flow holes based on the original designer's testing, however, it makes me feel better having them. STL uses 15mm x 2mm magnets.
Ein passendes Gehäuse für das runde Hygrometer mit den Außenmaßen 45mm und gerader oder schräger Klemmhalterung. Gedruckt mit BambuLab X1C 0,4mm Nozzle in 0,14mm High Quality
Had one of these meters just laying around. So I decided to make a mount for the K1 Max. Even though it's probably not need. You'll need one that's 1.06"W x 1.81"H from what the amazon page says. I actually took it off and lost is…
I wanted to have a clean solution to hold a hygrometer and a boveda pack for my IKEA Korken jars. This solution fits completely into the lid and doesn't stick out. It requires around 3-4g filament to print both parts. I use the 1L Korken…
Screw-Lid Desiccant Containers Desiccant containers with screw lids and lots of holes. They are designed to hold Dry & Dry silica gel beads (or any silica gel beads larger than about 2.5mm in diameter) and to be placed inside filament…
Here's a simple desk stand for the common hygrometers available online. Print face down without supports. Category: 3D Printer Accessories
Here's a simple mount to hold a hygrometer/temperature sensor for the RepRack storage system. Print as shown and use supports. Secure to the rack using two M3x16 screws and nuts. Category: 3D Printer Accessories
First of all: I have no clue how to remix properly, so sorry for this jank of a remix. I prefer a bottom positioning for the hygrometer, so I added an option to mount it there. Since I added more than enough small and flimsy plastic…
Feb 17 2025 update :- An error with the button assembly was brought to my attention today. There was no hole where there should have been one on one of the button tops. I've done a quick fix and re uploaded with the new button replacing…
The original basket weave design by psychprod is ingenious, but being me, as soon as I printed it I knew I would like to tweak a few things, and, again being me, the best way to do so would be to remodel the whole thing from scratch...…
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring area of the mount. The mount just slides into position at the very front of the dryer interior - no screws or hardware…
Quick simple print for the 40mm Thermometer Hygrometer found on Amazon Magnets are 10mm by 2.5mm
