Chitu E1 Box Hygrometer Mount with PTFE Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This combines the mandatory hygrometer mod with the must-have PTFE mod
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 60
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please also have a look at my v2 of this model:
Everybody needs a nice hygrometer for the Chitu E1 boxes. Proper connectors (which do not slip in or out) are also almost a must if you print from the box. This model combines those two into one. It will not interfere with any spools (unlike some other models). You can choose between M6 and M10 fittings.
Variant M6:
1x chitu_e1_hygrometer_ptfe_mount.stl (no support needed)
2x chitu_e1_M6_nut.stl (this version requires support in the center)
Variant M10:
1x chitu_e1_hygrometer_ptfe_mount.stl (no support needed)
2x chitu_e1_M10_nut.stl (no support needed)
I recommend printing it in PETG (or better) at a low layer height (i.e. 0.15mm or less). Print the model in the orientation in the file