Hygrometer Mount for Sunlu FilaDryer S1 Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring…
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 1
- Views
- 269
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring area of the mount. The mount just slides into position at the very front of the dryer interior - no screws or hardware needed.
Notes:
I have used the following hygrometers: https://www.amazon.com/gp/product/B0CMTNLK2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B0C74T4JH1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Both fit nice and snug. One batch did have a slight burr on the side flange so it couldn't be inserted, but the burr was easily/quickly removed with a file.
If purchasing a different model make sure it can read down to 10% as some hygrometers only go to 20%.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
Yes
0.20
Infill:
15%
Category: 3D Printer Accessories