Hygrometer Mount for Sunlu FilaDryer S1 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 269
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a device to hold a hygrometer inside of a Sunlu FilaDryerS1 Plus. The hygrometer fits snugly into the ring area of the mount. The mount just slides into position at the very front of the dryer interior - no screws or hardware needed.
Notes:
I have used the following hygrometers: https://www.amazon.com/gp/product/B0CMTNLK2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B0C74T4JH1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Both fit nice and snug. One batch did have a slight burr on the side flange so it couldn't be inserted, but the burr was easily/quickly removed with a file.
If purchasing a different model make sure it can read down to 10% as some hygrometers only go to 20%.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
Yes
0.20
Infill:
15%
Category: 3D Printer Accessories