Screw-lid Desiccant Containers + Hygrometer (18 Variations!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw-lid Dessicant Containers. Support for "solid" lid and lid with hygrometer mounting hole. 3 size cups and heights.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 86
- Makes
- 1
- Views
- 374
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Screw-Lid Desiccant Containers
Desiccant containers with screw lids and lots of holes. They are designed to hold Dry & Dry silica gel beads (or any silica gel beads larger than about 2.5mm in diameter) and to be placed inside filament storage or dry boxes to keep humidity levels low.
Comes in three sizes and three heights (sizing guide below). There are also two variants of lids, one with a mount for a hygrometer (cheap mini hygrometers that measure about 1"x1.75").
The threads do have overhangs and thus you need decent bridging/overhang performance to print these. If you have issues with stringing or the lids catching, decrease the layer height. I have found (on my P1S) that a 0.2mm layer height works well, with 0.24mm degrading the quality of the threads and resulting in light stringing. Print with one or two walls and sparse infill.
| Cup Size | Diameter |
| Small | 2.5" |
| Medium | 3.25" |
| Large | 4" |
| Cup Height | Height |
| Short | 0.75" |
| Regular | 1.25" |
| Tall | 1.75" |
Lids:
NH = No Hygrometer mount
H = Has Hygrometer mount