1 / 4
Screw-lid Desiccant Containers + Hygrometer (18 Variations!) — zdjęcie 1
1 / 4

Screw-lid Desiccant Containers + Hygrometer (18 Variations!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screw-lid Dessicant Containers. Support for "solid" lid and lid with hygrometer mounting hole. 3 size cups and heights.

Ocena
5 / 5
Polubienia
11
Pobrania
86
Wydruki
1
Wyświetlenia
374
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Screw-Lid Desiccant Containers

Desiccant containers with screw lids and lots of holes. They are designed to hold Dry & Dry silica gel beads (or any silica gel beads larger than about 2.5mm in diameter) and to be placed inside filament storage or dry boxes to keep humidity levels low.

Comes in three sizes and three heights (sizing guide below). There are also two variants of lids, one with a mount for a hygrometer (cheap mini hygrometers that measure about 1"x1.75").

The threads do have overhangs and thus you need decent bridging/overhang performance to print these. If you have issues with stringing or the lids catching, decrease the layer height. I have found (on my P1S) that a 0.2mm layer height works well, with 0.24mm degrading the quality of the threads and resulting in light stringing. Print with one or two walls and sparse infill.

Cup SizeDiameter
Small2.5"
Medium3.25"
Large4"

 

Cup HeightHeight
Short0.75"
Regular1.25"
Tall1.75"

 

Lids:

NH = No Hygrometer mount

H = Has Hygrometer mount

Tagi