P
Printables
Dessicant holder (curved for outside of spool) with Funnel
Printed here in PET-G .2 layer, 15% infill no supports. Funnel also fits many popular desiccant boxes for the Bambu AMS
Wyniki wyszukiwania: dessicant
Liczymy pasujące modele…
P
Printables
Dessicant box
This is a desiccant box that I whipped up for my use. It fits in the bottom slots of a 17 gal plano sportsman trunk that I use for filament storage. Nice clean aesthetic and the lid is a snap fit with small slots in each end that you can…
P
Printables
Creality Dry Box 2.0 Dessicant Box with Lid
Inspired by the popular Polydryer mod here , I decided to do something similar for my Creality Dry Box 2.0 rather than buy another dryer. Printed in Prusament ASA with 0.4mm CHT nozzle on default settings "0.20 Balanced" plus a brim in a…
P
Printables
Dessicant Box - Prusa Spool without Flange - AMS-Lite
Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…
P
Printables
Tall Dessicant Box 40x150x150mm
Just a desiccant box I made because I was frustrated with other boxes. I sized it to fit between rollers in a large dry box. The lid doesn't fit quite right until both the box and lid are the same temperature so if you try and put a hot…
P
Printables
MB Dessicant Holders
With this setup you can orient your drybox upside down or right side up and it will not fall. Shake it stir it throw it around and everything will remain where you left it.
P
Printables
Prusament Spool to Dessicant Container
Print it (ASA or ABS is advised), assemble it using a used prusament spool and 4 zip ties, fill it with dessicant bags, throw it into your filament spool box, with the other spools. When it gets wet, throw it into your filament dehydrator…
P
Printables
Large 3 x 5 Silica Gel / Dessicant Holder with Screw Lid
3inches x 5 inches silica gel holder with screw lid
P
Printables
AD5X Silica Dessicant Clip-on Box
Silica basket, designed to snap on the outside of the IFS module on the Flashforge AD5X. Printed with a 0.40mm nozzle on the AD5X in Flashforge PETG-CF, 0.20mm layer height, with tree supports. I recommend using PETG or PETG-CF, as the…
P
Printables
Top Holder Dessicant Eibos Polyphemus
Wenn man den Grundentwurf nutzt, kann der hintere waagerechte Ausgang für das Filament nicht genutzt werden.
P
Printables
Creality SpacePi Space Pi x4 Dessicant Holder, (reinforced edit)
(**Copied from original part description, all credit to Spam N Rice**) Easily removable dessicant holder for the Creality SpacePi x4 filament dryer. There is very little extra space in the dryer to add a dessicant holder. This design…
P
Printables
Screw on lid for Ikea 365 Drybox dessicant box
Requires: 2x voron style M3 5mm dia 4mm long heatset inserts 2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws. There is a drilling guide so you don't have to reprint the boxes, just…
P
Printables
Small silica gel dessicant box container + mount
Small dessicant box Gaps are 1mm, so silica gel won't escape. Lid slides shut and tab helps to open it. In the files is mount to mount it with double sided tape to e.g. filament container wall Tab with hole is NOT for hanging! Box is 93 x…
P
Printables
USS Drybox Dessicant Holder
I made a desiccant holder for the USS drybox that has more gaps for ventilation and no branding. So if you like simplicity and practicality- this is the perfect model for you.
P
Printables
Dessicant bottle fitting in Prusa USS Drybox
The files are: Silicagel container/bottle for Prusa USS Drybox screwable cap measuting cap (size of container) funel (to fill the container) Regeneration Print in PLA or PETG if you take out for regeneration. Print with adapted heat proof…
P
Printables
Dessicant box for 20l drybox
I drew this in about an hour. It's a simple box that uses gyroid infill to retain a lot of silica for my 20l dryboxes. The short boxes hold ~260g and you can fit 2 on each side, for a total of 4. I'm running these one per drybox right now…
P
Printables
Adjustable Spool Holder for Dessicant
The bottom part is original, and the ventilated remix combined, other parts are from the original model.
P
Printables
In-spool dessicant container with hygrometer - stronger weave, vented lid
The original basket weave design by psychprod is ingenious, but being me, as soon as I printed it I knew I would like to tweak a few things, and, again being me, the best way to do so would be to remodel the whole thing from scratch...…
P
Printables
Dessicant Spool Holder for New and Original Style Sunlu Spools
This is an Adjustable Spool Holder for Silica Gel (Desiccant) / Spool Weight developed specifically for the Hydra AMS and Bambu Lab AMS. Still, it should be useful for regular dry boxes where the spool is on top of rollers/roller…
P
Printables
Dessicant Box with sliding lid
Made a dessicant box for my dry box for storing filaments. The box dimensions are 200mm x 65mm x 95mm. I'm not sure how well scaling will work in a slicer but you're welcome to try. Lid is sliding with a little friction fit so it doesn't…
P
Printables
Dessicant Bin for Musli Dry Box
Prints with .4 or .6 nozzle. It can be perfectly used with the lid of the remixed model itself. Max width of the top openings is 1.9mm and 2.0mm on the side. Check your own dessicant to make sure it is not smaller. To use smaller…
P
Printables
dessicant tray for sterilite 18"x 14" tub
a nice large dessicant tray that can be used in any larrge box. i specifically made the for the large 18" x 14" sterilite containers. works very well even with one but made to be a plate on the bottom if you print 4. .2 settings will…
P
Printables
KYZ Dessicant holder resized for new Sunlu spools
Based on the great dessicant spool holders by @kyzdesign Resized to fit the new Sunlu spools. Note that all parts have been resized, so you will need to use funnel, key, etc included in model Best printed in PETG for maximum compatibility…
P
Printables
PolyDryer dessicant dryer
Printing Filament choice The box and lid will be exposed to relatively high temperature. I originally planned to use ASA for them and you probably should to be safe. That said, while prototyping I used a transparent PETG for the box (to…
P
Printables
Yet Another Dessicant Container
I was working on my drybox and I wanted a dessicant container to mount to the lid. There are plenty of great models available but I wanted to try my hand at designing one. It measures 2" X 6" X 1" with 2mm walls and 1mm slits. The lid…
P
Printables
PolyDryer Dessicant Tray and Lid
IMPORTANT: add a print modifier to the bottom of the tray and set the Top shell layers and bottom shell layers to zero also add sparse infill denity to 25-30% to ensure proper ventilation for the tray. For reference see picture 7/7! This…
P
Printables
Dessicant Bin for Improved Printability
I recommend setting perimeters to at least 4. This will keep the surface clean on the inside of the bin. Print Settings: Prusa XL 0.6 mm Nozzle 0.32mm Structural, Input Shaping No Elephant Foot Compensation Filament: 3D-Fuel ASA 255°C…
P
Printables
Filament Spool Hygrometer and Dessicant Holder
This goes against your filament reel to hold your hygrometer and provides a place for your desiccant holder. It also features 2 holes for you to feed your filament though to keep the end from poking a hole in your vacuum storage bags.…
P
Printables
Better dessicant bin design for the cereal box filament dryer
This is a new design for the desiccant bin of the cereal box filament dryer
P
Printables
PRUSAMENT SPOOL RE-USE DESSICANT CONTAINER
It's a great idea, recycling or reusing everything, but sometimes it doesn't go as expected! This is a really fun print in several parts which can hold up to 200 grams of desiccant. THE MODEL This is a little more complicated than my…
P
Printables
Hygrometer Addon for Ikea 365+ 10.6l Dessicant Lid
For people who are using https://www.printables.com/model/185335-filament-trockenbox-filament-dry-box and wants to add a circular hygrometer that is removable and is installable and also non-destructive. I have created a hygrometer…
P
Printables
Dessicant Holder - Slide Lid
I had issues witht the origional design and made it avaible to slide open
P
Printables
dessicant box for eryone dryer with slide lock top
didnt really bother to do anything for tolerances just printed first try and really liked the friction fit, this should allow for more dessicant considering the center supports are gone, no cap needed, indent to remove is gone however.…
P
Printables
Dessicant container wedge
Fill half way with dry desiccant. Snap the lid into place. The shape fits a standard cheap food dehydrator to recharge the desiccant. Do not overfill , moisture saturated desiccant will double in volume. The bottom and lid are grids with…
P
Printables
Better DryBox for filament dessicant Spool Holder
A better Dry box with Desiccant holder, Label, PTFE connector for Australian Cereal Box This is a reworking from scratch of 3d print designs to make a Dry Box from readily available cereal box in Australia. I wanted to make a print with…
P
Printables
Dessicant Bin Hex Pattern for "Filament Dry Box with Rollers"
This print can be printed with 0.6 or 0.4mm nozzle with no support.
P
Printables
Filament Drying Dessicant Holder
This is a dessicant holder that fits into the bottom of Big W Basics Cereal Boxes (3.8L version) Filament rolls fit nicely into these containers. Endcap snaps on and holds itself closed. Tweak to achieve this effect if required These can…
P
Printables
Dessicant holder (curved for outside of spool) with Funnel
Printed here in PET-G .2 layer, 15% infill no supports. Funnel also fits many popular desiccant boxes for the Bambu AMS
P
Printables
IKEA Samla (22L) Dessicant box - meshed
I printed with 3 perimeters and 10% cubic infill, PLA. The basket lids print with the brim. For one box, you need: 2x basket holder 2x basket holder mirrored 4x basket lid 4x basket 2x Frame Outer 1x Frame Mid You can use included…
P
Printables
Dessicant container (print in vase mode)
Learning the basics of Freecad and playing with vase mode. I am printing it with a 0.8mm nozzle for more strength but it can be printed with a standard 0.4 nozzle as well. Make sure you pick the correct lid. Sliced with OrcaSlicer with…
P
Printables
500g Protopasta Spool Dessicant Weight
My 500g cardboard spools kept getting bucked off of the Bambu AMS during printing. So I threw this together to hold desiccant or some weights, or you can just put whatever you want in it. Works great with the AMS so far, I live in a humid…
P
Printables
dessicant scoop with sieve, left and right handed.
a scoop for scooping dessicant in contrainers with a build in sieve to filter out small pieces. both Left and Right handed scoops
P
Printables
Dessicant Box for Rubbermaid 21 Containers
For those of you who use the Rubbermaid 21-cup cereal containers to hold your filament spools, this flat box can be used at the bottom of the container. Simply fill it with silica beads and fit the lid on it. The container and lid have…
P
Printables
Dessicant holder
Desiccant Holder: Securely stores desiccant to keep contents dry and moisture-free. Ideal for packaging, storage, and transport. Durable, reusable, and easy to use in various environments.
P
Printables
PolyDryer Dessicant Tray and Lid (shorter)
Based on Alexander's model, but made it shorter for better air circulation inside the PolyDryer. Also my lid has smaller opening (you can use my tray with the original lid). Ready to print. You do not have to change the layer settings.
P
Printables
Dessicant box
This is a desiccant box that I whipped up for my use. It fits in the bottom slots of a 17 gal plano sportsman trunk that I use for filament storage. Nice clean aesthetic and the lid is a snap fit with small slots in each end that you can…
P
Printables
Super Dessicant Jar (Vase Mode) and Lid with Hygrometer and Funnel
I love zuberio's Super Desiccant Jar that prints in vase mode. I added two new lids, one with a hole for a hygrometer, and the other with Funnel. I took inspiration for the lid from @3D_Workspace's Silica Gel Box (which I also like), and…
P
Printables
Hygrometer Dessicant Cup Insert - No Supports
I used these with 4l nuovvo Cereal boxes (on big bad bezos store) and the ubiquitous square snap in hygrometers. If you don't need the hygrometer mount there is an even better printable remix:…
P
Printables
Filament Spool Dessicant Container ( with .6 nozzel prints in 45min)
If you've printed with any of the hydrophilic filaments like TPU, PETG, or Nylon, you know how critical it is to keep them dry! There are several excellent desiccant bead holders you can download, but I wanted one that printed fast,…
P
Printables
Core One Dry box Dessicant Shelf
I keep all of my desiccant in mesh bags for my various dry boxes. This is a shelf to hold one of them for the drybox I created for the side panel. Can be printed without supports. Need x4 20x5x2 magnets to hold it to the top of the panel.…
P
Printables
Polydryer Basket Remix with Lifting Handle and Gyroid Base for Dessicant
Model shown with 40% gyroid infill with zero top and bottom layers. The best way to use this.
P
Printables
Dessicant Box Funnel
This wide-mouthed funnel was sized through trial and error to fit the specific dessicant holder linked to above. I modified an existing funnel model (listed above) to fit perfectly.
P
Printables
Dessicant Container - Fits in Filament Spool. Includes hygrometer lid, vented lid, funnel.
I put these in filament spools that are stored in my filament storage bins. (I use Ezy Storage 18L/19Qt Waterproof Clear Latch Totes, which hold 5 spools, are stackable, and seal well with silicone grease applied to the gasket.) These…
P
Printables
Simple Dessicant Bead Funnel
Simple Dessicant Bead FunnelSimple Dessicant Bead Funnel for pouring dessicant from dry boxes (like cereal boxes) back into reusable dessicant container. Flange reduces spillage. I made this in tinkercad:…
P
Printables
Rechargeable Dessicant
A clone of https://he.aliexpress.com/item/1005006828275284.html For $5USD you can buy it instead. But I rather like this one. BOM Heater - https://he.aliexpress.com/item/1005006954619853.html Plug Socket -…
P
Printables
Dry Box Spool Holder & Dessicant Container for Kobalt X-Large Tote
Spool holders and desiccant container for the Kobalt X-Large tote (https://www.lowes.com/pd/Kobalt-Kobalt-24-Gallon-Weatherproof-Tote/5001968209) Holds at least 16 1KG spools. The container holds ~1/2 liter of desiccant. Requires 250mm…
P
Printables
Dessicant box with fans
I have a very large dry box (like a 40 gallon kobalt storage tub with gasketed locking lid). I have several dessicant boxes placed in the corners, but didnt feel they're fully capable of keeping it dry, as large as it is. So I grabbed a…
P
Printables
Silica Dessicant Tray & Brackets - FreeCAD Parametric
User trtr6842 designed the box and lid ( 598186 ), which are easy to print and function very well. They helpfully provided a FreeCAD parametric model for users to create additional sizes. (If you only want a freestanding box then it might…
P
Printables
Ultimate Dessicant Spool Holder
This is a spool holder meant to be filled with dessicant. Meant to be the dryest open spool holder outhere. To improve it, I'll try to get my hands on a USB heated pad to put underneath and plug it in my 3D printer. It has insert for…
P
Printables
Chitu E1 Dessicant Box Loading Helper - No Supports
Remixed dessicant box loading tool. Should print without supports in the orientation suggested if your printer can handle 60 degree overhangs; only unsupported portions are the "tops" of the feeding slots, which should just be an easy…
P
Printables
Sovol SH01 and Comgrow - Dessicant Containers
I tried other models of dessicant containers meant for this model of filament dryer but none were easy or worked well. I made this model that simply slides into place and had an easy to remove lid for quick removal and refilling of…
P
Printables
Old Version ESun Refilament Spool Converter (dessicant slot optional, no glue required, screw-in)
Main Considerations: - NO CENTER SPOOL HOLE, must be supported at bottom only - You must cut the ESun spool in half to use this - For plastic, not cardboard ESun spools - Check if refilament cardboard core is around 92~93mm inner diameter…
P
Printables
Large Dessicant Drying Tray with Spout and Lid
Like most people, I didn't like the models I found on Maker World, so I made my own. This is a large desiccant drying tray (recommend printing in ABS/ASA for temperature resilience.) The infill pattern and side wall patterns are small…
P
Printables
FDPlast Spool Dessicant Can (outdated in 2026)
Here is a simple silicagel container for FDPlast spools. The container consists of three parts: can body, inner lid that holds the silicagel inside and the locking ring that locks the container on the spool. This way the container can…
P
Printables
Dessicant box REMIX for Core One Dry Box mod 7cm and 8cm version
A simple remix. Height increased to 8cm and 2 transom added for greater strength and a better final appearance.
P
Printables
Advanced Cereal Box 4L Dessicant Holder (Remixed for PrusaSlicer)
*Note: *.3mf files not compatible with EasyPrint, please slice manually with PrusaSlicer. All credit to @JohnLama for the advanced improvements (and @claytononeill for the original). It took me some time to configure it to work for…
P
Printables
Creality Dry Box 2.0 Dessicant Box with Lid
Inspired by the popular Polydryer mod here , I decided to do something similar for my Creality Dry Box 2.0 rather than buy another dryer. Printed in Prusament ASA with 0.4mm CHT nozzle on default settings "0.20 Balanced" plus a brim in a…
P
Printables
Dessicant Box - Prusa Spool without Flange - AMS-Lite
Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…
P
Printables
Holder mod for Coreboxx dessicant to fit in Inbxx
Holder mod for Coreboxx dessicant to fit in Inbxx
P
Printables
Tall Dessicant Box 40x150x150mm
Just a desiccant box I made because I was frustrated with other boxes. I sized it to fit between rollers in a large dry box. The lid doesn't fit quite right until both the box and lid are the same temperature so if you try and put a hot…
P
Printables
Dessicant Holder for Filament Rolls
These two end caps are used with a 55mm section of 1 1/2" Schedule 40 PVC pipe to hold indicating Desiccant beads. This fits in the center of most filament spools for storage or use in an AMS. These were printed on an Anycubic Kobra S1…
P
Printables
MB Dessicant Holders
With this setup you can orient your drybox upside down or right side up and it will not fall. Shake it stir it throw it around and everything will remain where you left it.
P
Printables
Prusament Spool to Dessicant Container
Print it (ASA or ABS is advised), assemble it using a used prusament spool and 4 zip ties, fill it with dessicant bags, throw it into your filament spool box, with the other spools. When it gets wet, throw it into your filament dehydrator…
P
Printables
Large 3 x 5 Silica Gel / Dessicant Holder with Screw Lid
3inches x 5 inches silica gel holder with screw lid
P
Printables
AD5X Silica Dessicant Clip-on Box
Silica basket, designed to snap on the outside of the IFS module on the Flashforge AD5X. Printed with a 0.40mm nozzle on the AD5X in Flashforge PETG-CF, 0.20mm layer height, with tree supports. I recommend using PETG or PETG-CF, as the…
P
Printables
Top Holder Dessicant Eibos Polyphemus
Wenn man den Grundentwurf nutzt, kann der hintere waagerechte Ausgang für das Filament nicht genutzt werden.
P
Printables
Creality SpacePi Space Pi x4 Dessicant Holder, (reinforced edit)
(**Copied from original part description, all credit to Spam N Rice**) Easily removable dessicant holder for the Creality SpacePi x4 filament dryer. There is very little extra space in the dryer to add a dessicant holder. This design…
P
Printables
FDPlast Spool Dessicant Can (updated for 2026)
NEW INFO: An updated silicagel container for new FDPlast spools. The new spool is significantly narrower allowing it to fit into multimaterial systems such as AMS or spool dryers like Creality Space Pi. If you have already printed…
P
Printables
Screw on lid for Ikea 365 Drybox dessicant box
Requires: 2x voron style M3 5mm dia 4mm long heatset inserts 2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws. There is a drilling guide so you don't have to reprint the boxes, just…
P
Printables
Dessicant central tray for Polymaker Polybox 2
There are many models of trays that fit the front or rear part of the Polybox 2, this one fit in the middle to add even more dessicant. Could work with the first Polybox model, not tested. Similar design that goes well with :
P
Printables
Dessicant container for Creality CFS
Print ready for Creality K2 Plus; 15% infill, auto support tree. Dovetail cut needs to be glued ( I used "Kraftprotz 3D Sekundenkleber Gel") I recommend white PLA as the color of the Silica pearls can be easier differentiated
P
Printables
Small silica gel dessicant box container + mount
Small dessicant box Gaps are 1mm, so silica gel won't escape. Lid slides shut and tab helps to open it. In the files is mount to mount it with double sided tape to e.g. filament container wall Tab with hole is NOT for hanging! Box is 93 x…
P
Printables
USS Drybox Dessicant Holder
I made a desiccant holder for the USS drybox that has more gaps for ventilation and no branding. So if you like simplicity and practicality- this is the perfect model for you.
P
Printables
Silica Gel Dessicant Container Funnel
This is a remix of gdrag's excellent Silica gel spool container cap / lid, modified with a large funnel to make filling easier. The funnel is twice the diameter of the container opening so it really helps to keep from spilling those…
P
Printables
Dessicant bottle fitting in Prusa USS Drybox
The files are: Silicagel container/bottle for Prusa USS Drybox screwable cap measuting cap (size of container) funel (to fill the container) Regeneration Print in PLA or PETG if you take out for regeneration. Print with adapted heat proof…
P
Printables
Dessicant loop dry box XXL
My model is essentially a larger version of the desiccant loop dry box. I’m not using it in the HDRY system, but instead inside a BESTA cabinet from IKEA. Since space is somewhat limited in my dry cabinet, I designed it to be placed…
P
Printables
Dessicant box for 20l drybox
I drew this in about an hour. It's a simple box that uses gyroid infill to retain a lot of silica for my 20l dryboxes. The short boxes hold ~260g and you can fit 2 on each side, for a total of 4. I'm running these one per drybox right now…
P
Printables
Dessicant box for filament spool
To store 3D filament in a plastic bag with some dessicant bags is a routine. But impossible to know if the dessicant is full of water or not, because it's a bag. In addition the location of the bags is random. The idea was to create a…
P
Printables
Dry Box (Cereal Box) Filament Spool Holder + Hygrometer + Dessicant Holder
Build your own Polymaker Polydryer filament drybox using inexpensive cereal boxes. Includes a dessicant store in the screw-top spindle and snap fit hygrometer. Total cost: $6.75 $4.15 Cereal Box $1.20 Hygrometer $0.40 PTFE connector $1.00…
P
Printables
Dessicant Holder for Yoopai Filament Dry Box
This box fits the Yoopai dry boxes: https://www.amazon.com/dp/B0G6ZWQSVY Here are some instructions: Use PETG because it is a little more flexible and can be put in a filament dryer at a higher heat than PLA. put the bottom flat on the…
P
Printables
Hearing Aid Case with Dessicant Chamber
This is a great model from Doug, and serves me very well, but I modified it to make room for a bit more dessicant. Printed on a Prusa Mk4, using eSun PLA, and with supports.
P
Printables
Dry (Cereal) Box Spool Holder + Hydrometer + Dessicant Holder Remix
Remix of the original cereal dry box spool holder - it's slightly taller, has larger diameter desiccant tube, and a deeper vented hydrometer holder that allows air to reach the back of the meter easier. It comes in an 83mm and 77mm wide…
P
Printables
Thin Snap-Fit Dessicant Box
I made this snapfit dessicant box for my experimental filament storage cooler, no more hunting loose dessicant packets that get under the spools. There are two files with a print-in-place hinge. Ideally print the regular one if your…
P
Printables
dessicant inside spool remix
i didnt have a hygrometer ;-) prints with 0.2mm layer. but the one in the picture is printed in 0.44 with a 0.6mm Cht.
