Sunlu S1/S2 solid/vented Dessicant container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dessicant container which allows drying in Sunlu S1/S2 filament dryers
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 274
- Wydruki
- 6
- Wyświetlenia
- 1237
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model is a great fit for your Sunlu S1 or S2 Dryer, but I didn't like the amount of larger slots that made printing harder & slower. I also feared the dessicant would fall through some of the slots.
I remixed it to be completely solid and reinforced with a couple of ribs. By printing with 4+ walls, gyroid infill (30 or 40%) and no top/bottom, you get mesh walls that allow for great airflow.
Additionally I added 2 modifiers to the walls that print those sections with 0 walls, so that they too are printed as gyroid mesh.