InSpool Dessicant Container for 2mm + beads. 3 Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silica Holder Small Beads I bought a massive bag of 2-5mm silica gel, then when I tried several holders found here on…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 316
- Wydruki
- 2
- Wyświetlenia
- 1136
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Silica Holder Small Beads
I bought a massive bag of 2-5mm silica gel, then when I tried several holders found here on Thingiverse, all the holes were too big and the beads escaped making a mess and being a safety issue for my son, so I made my own.
Design
The design uses triangles instead of squares or lines this means that the area for the bead to fit between is much smaller. I have incuded two sets of modles, the first set which begins with 'N4-' are optimized for 4.mm nozzles.
The second set which is preprended with 'N6-' are optimized for 0.6 mm nozzles (which is what I use).
The are three sizes (small = 27 mm high, medium = 42.5 mm high, large = 52 mm high) the diameter is 49.5mm and fits inside a standard spool for storage in a zip lock bag or vacuum bag.
Quick Print Version
I have another list for the quick print version, they are the same container just without the triange pattern on the side of the bottle, they print much quicker and are stronger.
https://www.printables.com/model/445700
Printing
Print without supports lay the top of the lid and the bottom of the container flat on the build plate.
The small triangles are not the prettiest once printed, but the canister really does the job well of holding small beads of silica.
Other Designs
Check out my other stuff & follow!
https://www.printables.com/@Micah_754861
Feedback and Makes
It really makes a difference and feels great when you leave a comment, like, or collect things to the people who post them, so PLEASE do that for all people as it builds community. Super important in these Covid Times. Even if you do not post things you are still part of the community (in fact you are the majority of the community), so please like, collect and comment!
Please do this for all stuff you download from everybody!
Print Settings
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament: Fiberlogy PLA Mutlipel
Category: Containers