Liczymy pasujące modele…
his is a Remix “Centering Disc for Fiberlogy New Filament Spool" for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 I modified the centering discs to fit the Fiberlogy New Filament Spool. Update…
This adapter allows perfect fitting of Fiberlogy Refill filament bundles onto Bambu Lab Reusable spools, or self printed spools that have the same size and notch as those of Bambu Lab. It has cut-outs to allow the tie-wraps go in and cut…
This is “Sleeve for Fiberlogy New Filament Spool” for an amazing project " Filament Spool Switcher & Winder ". Design by @MiklosKiszely_486882 I consume a lot of Fiberlogy filaments. So I'm left with a lot of empty spools. The new…
Here is my Masterspool inspired by Fiberlogy's new 2023 spool design. These were first shown at Formnext in November and look really cool. Apparently the new spools will be reusable for their refill packs but as its early days, no one has…
~ Fiberlogy collaboration series ~ We are introducing to you a whole new collection of vases available for free! This is the effect of a great collaboration with Fiberlogy. They invited us to test their new filament series and share the…
A MasterSpool for the BambuLab AMS. Use it for Fiberlogy 850g Refill print material
Simple MasterSpool, remixed from E For Extrude to work with CatYarn spools, as well as a generic spool that can be used in a rewinder. Printing Guide You more than likely want to be using Arachne perimeter generation when slicing, if not…
This is a core adapter for the new Fiberlogy spools. It's designed for the Fiberlogy 850g refills but can be adapted for other refills. Printing recommendations: If you are using a drybox or plan to use these spools in the Bambu Lab AMS,…
I love the Fiberlogy new spool and I use a lot of their refills. But I don't think the inner cardboard part will hold up to wear after repeated use. To prevent any accidents in the future I have designed a replacement to avoid wear and…
I spool holder designed for 2.5KG fiberlogy spools. 110mm between each side.
~ Fiberlogy collaboration series ~ We are introducing to you a whole new collection of vases available for free! This is the effect of a great collaboration with Fiberlogy. They invited us to test their new filament series and share the…
Models I have found had too long print time, so I've decided to design my own part, aiming to use as little filament as I could, so printing from leftovers was possible. It takes only ~20g of filament and is designed to be press-fitted…
Printer: Bambu X1C Surface: Engineering Plate (other surfaces might work) Hotend: 0.4 mm E3D High Flow ObXidian (the Bambu hotends should work) Filament: Fiberlogy PP Natural Use at your own risk. I offer no guarantees or support. Tips…
ATTENTION - Filament clip version 1 is not compatible with AMS System Hello Everyone I designed two versions of the Filament Clip for Fiberlogy spools that can be permanently attached. Thanks to this, it is always at hand and attaching…
I use mostly fiberlogy refills and I wanted to be able to use them in my AMS, so I created this adaptor for the Bambulab refill spools This is my Paypal if you want to support my work and thanks in advance for that…
The Fiberlogy refill, does not fit well with their spools. This spacer keeps the filament in order.
Insert for the new Fiberlogy spool. The insert is used to reuse an empty fiberlogy spool multiple times. After making this modification, you can put Refill filament on the spool. The used spool should be disassembled. Place a 2mm spacer…
Replace standard cardboard fiberlogy core with this screwed core
I've been working on my filament feed system for a while now. I created https://www.thingiverse.com/thing:4513479 and used it for a while because I couldn't print a whole Master Spool on my printer. I recently figured out that it's okay…
The problem with the fiberlogy spool is that it is too wide to accept the refills. Another user has posted a spacer that will keep the filament squeezed ( https://www.printables.com/model/110743-fiberlogy-masterspool-spacer-add-on ), but…
FIBERLOGY filament spool key chain
An inlet for the resusable spool from BambuLab. Use it for Fiberlogy 850g refill print material
My original MasterSpool is a little hard to load at the beginning – the filament can slip off and fall underneath the spool. Inspired by https://fab365.net/items/412 (which does not fit fiberlogy refills ), I replaced the flanges on my…
The chuck will need to be fully closed or fully opened before the drill starts rotating.
I repaired STL file that originaly names: fiberlogy-spool-A
Pusher for Fiberlogy Refills(850g) on Bambu Lab Spools. Thanks @Morius for sharing the original design. You need to use it with “ Bambu Lab - Spool Adapter - Fiberlogy Refills ”, thanks @Flight777 for sharing this design. You find both…
Remixed from Gilles160 , based on the previous work from zoltanf , Chrismettal - Binary-6 , w00h , misterT , Sonic_2_1 & Lichtjaeger . Thanks to these great creators for making something that I could remix. For me the 46mm Adaptor was not…
Remixed the center from E For Extrude Fiberlogy New Style MasterSpool Replacement Spool Holder to use heat-set inserts instead of threading directly into plastic. This makes for a part that can be taken a part several times without be…
A hygrometer holder that nicely snaps into Fiberlogy spools, holds the hygrometer securely, but is still easy to remove. I did not want to combine it with a silica gel holder, as I have a lot of these already, and sometimes use silica…
You want to organise your filament samples, These samples are the size of business cards, so they will fit the standard size business card organisers/folders. Size : 54x84, 1.2mm Thickness 1.2 mm Weight : 6 grams (ca. 2m of 1.75 filament)…
Your Fiberlogy spool deserves better than a basic silica box. TL;DR Everything you could want from a desiccant container for your Fiberlogy filament spools. Maximum airflow, secure spool retention, easy filling, a locking lid and no extra…
These are adapter rings for 3DJakes PLA, PETG, ASA and TPU spools. Before printing, double check the dimensions in the file name with your spool, 3DJake has some variants of similar spools and if you encounter one that I haven't uploaded…
Introduction The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per…
I use a lot of Fiberlogy filament. The center hole of the spools is rounded, which makes the spools wobbly on the Prusa spool holders (Experienced on my Core One+ INDX). So I created this "flange", a filler you place first on the spool…
~ Fiberlogy collaboration series ~ We are introducing to you a whole new collection of vases available for free! This is the effect of a great collaboration with Fiberlogy. They invited us to test their new filament series and share the…
![FIBERLOGY MASTERSPOOL [SPACER ADD-ON]](https://media.printables.com/media/prints/110743/images/1092170_6addf6f6-99ef-4451-93be-0dc6d77689b9/20201010_153206.webp)
![Fiberlogy spool conversion screw [REMIX FROM THINGIVERSE]](https://media.printables.com/media/prints/285982/images/2523920_399c8c36-cdeb-4b67-9874-f031ae2a869c/screenshot_2.png)
