Fiberlogy MasterSpool (fits Mini printbed) -- Folding Flanges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print a full-size MasterSpool on your Prusa Mini by Folding Up the Flanges
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My original MasterSpool is a little hard to load at the beginning – the filament can slip off and fall underneath the spool.
Inspired by https://fab365.net/items/412 (which does not fit fiberlogy refills), I replaced the flanges on my original MasterSpool with foldable flanges. I also split each hub into 3 sections to save print time and filament, which has the side-effect of making the threads looser – I no longer need to grease them.
In my test prints, I find that the edge pegs fit so well into the slot in the adjacent leaf that the spool stays together. Still, I included slots into which you can fit cable ties in case you need to reinforce the connections between the leaves.