1 / 3
Astra Lumafloris - Lamp with upcycled Fiberlogy spools — zdjęcie 1
1 / 3

Astra Lumafloris - Lamp with upcycled Fiberlogy spools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed lamp made with upcycled Fiberlogy spools.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per lamp. You only need to add unprintable electrical hardware.

BOM - Printed parts


- 1x Base
- 1x Base_with_thread
- 3x Block
- 3x Clip

BOM - non printed parts:


- 1x Bulb socket with cord and plug
- 1x Bulb

Printing settings

I recommend using PET-G for printing due to its thermal resistance. Also, I highly recommend using only LED bulbs because they create less heat than traditional bulbs.
Brim is required for printing Bases. Inverted "pyramid" shape causes wrapping corners. You can print without brim if first layer adhesion on your buildplate is really high.

Settings that I used:

Setting

Value

Nozzle

0.4

Layer height

0.16mm

Walls

3

Infill

20% rectangular

Support

Only for Block.3mf

Brim

Yes, 5mm


Assembly manual:

Disclaimers

Please use the "add text" option in the slicer of your choice and add the material symbol according to local laws about product safety and recycling.

If you are interested in commercial licence of this design, write me a DM.

Tagi