Astra Lumafloris - Lamp with upcycled Fiberlogy spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed lamp made with upcycled Fiberlogy spools.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per lamp. You only need to add unprintable electrical hardware.
BOM - Printed parts
- 1x Base
- 1x Base_with_thread
- 3x Block
- 3x Clip
BOM - non printed parts:
- 1x Bulb socket with cord and plug
- 1x Bulb
Printing settings
I recommend using PET-G for printing due to its thermal resistance. Also, I highly recommend using only LED bulbs because they create less heat than traditional bulbs.
Brim is required for printing Bases. Inverted "pyramid" shape causes wrapping corners. You can print without brim if first layer adhesion on your buildplate is really high.
Settings that I used:
Setting | Value |
|---|---|
Nozzle | 0.4 |
Layer height | 0.16mm |
Walls | 3 |
Infill | 20% rectangular |
Support | Only for Block.3mf |
Brim | Yes, 5mm |
Assembly manual:

Disclaimers
Please use the "add text" option in the slicer of your choice and add the material symbol according to local laws about product safety and recycling.
If you are interested in commercial licence of this design, write me a DM.