1 / 1
Prusament Masterspool Adapter 56mm for Fiberlogy Refills (Threaded Inserts)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from Gilles160, gilles160,zoltanf and Chrismettal - Binary-6 works, w00h, misterT, Sonic_2_1
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Remixed from Gilles160, based on the previous work from zoltanf, Chrismettal - Binary-6 , w00h, misterT, Sonic_2_1 & Lichtjaeger. Thanks to these great creators for making something that I could remix.
For me the 46mm Adaptor was not wide enough. I use Fiberlogy Refills and they come up a bit wider than others. So I added an extra 10mm to this design to allow for wider refills.
Suggested print as per Gilles160 recommendations with some mods(*)…
- In general: 2 external perimeter, 0% infill, 5* layers at top and bottom
- Modification disk at the middle with 3 external perimeters, 40% infill, 3 layers at top and bottom. (Add a Modifier Cylinder Shape, e.g. 120mm Diameter x 4mm Thick in Z)