Liczymy pasujące modele…
45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Coin stand for presenting your collectible coins from DLRP or 34mm Monnaie de Paris Coins.
Wydruk około 3,77 €–4,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4mm Arrow nock that may be printed in PLA. You may need to slow down the print. There may be a bit of stringing across the string prong that is easily removed. The brim should be set for inside and outside to anchor the print. Bonus,…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Printed it on my MK3S+. I use PETG for it and 30% infill. Remix because it is for 4mm cable and not for 10mm cable.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a tool to help remove 24mm Japanese pushbuttons, like Sanwa OBSF-24 Should also work with other Japanese 24mm buttons, Including OBSJ and OBSC
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
We play a lot of games and sometimes it becomes difficult to keep track of the score sheets. We wanted to group the scoresheets by the number of players. These paperclips, now with numbers 1 through 9, allow for a quick find of the…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…
This is a 24mm arcade button housing, nut, and cap using a cherry MX Switch. The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play…
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
I increased the inner diameter to 54mm and changed the thread. Thread tolerance = 0.35 mm so calibrate the flow rate beforehand. Material used = ~150 grams Edit: 22.11.2024: Now the whole model can be printed without support. added thread…
Use this file to test the readability of text at different font sizes. The are two files: TextTest_400umNozzle Slice this file for a 0.4mm nozzle, with 0.2um layer height. This model is dimensioned for that specific layer height.…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
Had to many 1/8 inch (4mm) hex bits lying around and made this for storing them on a wall. Added a version with holder for my screwdriver (22mm diameter Ferm CDM1140) Print instructions Category: Tool Holders & Boxes
Simple screwdriver 4mm hex bits holder. Can hold as many as 40. They don't fall out even if tilted, dropped or shaken. You might want to adjust the hole size for your printer. The bits can be easily taken out by hand or with the magnetic…
I printed them from PLA+, but you can print them from PETG Print 2 pieces to get a set, there is no need to mirror them. Make sure you print the outer walls first, because of the tight tolerances. Please don't reupload it to other sites,…
material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm
platzsparender Clip für die parallele Führung von 2 Leitungen/Kabeln a 6mm² einfach zu öffnen und zu verschließen in einteiliger Ausführung. Kabeldurchmesser ca. 6mm Gedruckt in PETG, in PLA nicht getestet, könnte aber wegen der fehlenden…
A simple adapter for 4mm Bits to 1/4inch hex. Print instructions Unassociated tags: 1/2inch Category: DIY Summary A simple adapter for 4mm Bits to 1/4inch hex.
A bit holder to collect up to 60(!) 4mm mini bits. The small size makes it perfect to store your mini bits where you want. The size is only 11 x 3 cm! IKEA Skadis owner: Take a look at the bit holder with Skadis mounts here →…
A few sample holders are found on here and other websites but nothing that allowed bottles with a diameter of 14mm. I decided to take inspiration from the designs but make it from scratch so I can later adjust it for different bottle…
I have been dreaming about a nice and stable shoulder rig for quite some time now. I've finally decided to make one myself, in 3D and sharing the design and adding new features as time pass. I really like gadgets... and i want to add…
You can use this for plugging spare 24mm holes in your arcade stick. If you're interested or would like to slightly tweak the model, here is a link to the source code .
My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I…
I've been really into fightsticks for a while and finally decided to print a case and hand wire a cheap brook board to get a hitbox/junkbox-esque controller made. My kailh choc switches were taking so long to ship out, so I decided to use…
Inspired by several similar tools, I wanted to create my own, using laser cut acrylic. Works with any break-away, single row, 2.54mm male header pins, regardless of length, even right-angle headers. Inspiration: Break-Away Header Pin…
!Zip with all files listed below exemple file! This a Modular Cooling Solution to get the BL-Touch closer to the hotend. With those fan ducts, the BL-touch is now Zero offset on the Y axis and Sub 34mm from the hotend output on the X axis…
My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I…
Really quick remix for Biltema pegboard, as I needed one for HSW and one for Biltema pegboard. EDIT: Added remix for smaller 4mm hexbits.
Fits 24mm Sanwa buttons without any modification to the button
Lifting pad / riser block with notches designed for the stock Vixen dovetail and rings on the Askar 71F Flat-Field telescope. Effectively raises the OTA by 7.4mm which provides enough clearance so that you can slide the dovetail under…
Since i've changed from a Wowstick to an electric screwdriver i wasn't happy that i couldn't use my bits anymore because they are microbit. With this adapter you can put your microbits onto your regular bitholder. For a good fitment i've…
For shooter with bad memory. You can attach a dope card to your rifle scope
BOM: Printed with ROSA3D High Speed PLA Dark Blue This is the "Double Wide" version of my structural mending plate set. At 40mm wide , these plates feature two parallel rows of holes. Why use the wide version? While the standard 20mm…
Also a remix of https://github.com/levpopov/LPX/. Supports choc v1 switches. Print the keycaps on the bevelled edge like so, with supports touching the build plate and 0.1mm-0.15mm layer height. Orient the cap so that you print fan is…
Precision screwdriver description: I didn't like the way most precision screwdriver felt (especially the end cap) so I made my own with a ball beared end cap using a 687 Bearing. I like the upper part of the LTT precision screwdriver,…
I remixed this model to add ecas 4mm fittings then made it larger and longer to improve reliability.
Diameter is 64mm. It is meant to be printed in colour of your wheels and logo filled with colour of your choice.
This is a 3D model for an adapter that connects a 1-inch BSP threaded fitting with a 24-mm hose. It is suitable for use in water supply or irrigation. I used it for connecting my washing machine to the drain. The main model can be printed…
This should work for watches that use a 24mm band, such as the ticwatch pro 5. Works with the quick release pins to connect to the watch. If you don't have any from another watch band, you will need 2 24mm quick release pins. The clasp…
Remixed the barrel to have a 14mm counter-clockwise thread for muzzle attachments.
Remix of Chri81's brio female-female cheat tile to be 54mm long to match what I already had in the set.
This is a fully 3D Printed, ejection recovery system for 74mm model rocket fuselages. It consist of two parts, a tube (fuselage) adapter that connects the lower section to the top and also serves as the cap that will hold the shock coord…
54mm Wildman Rocket Thin wall tubing fin alignment guide for 4 fin MD high power rocket. I also included the OR screenshot of my fins as the guides use the sweep of the forward and aft end to determine the angle of the fins so if your fin…
Phillips Hue Switch Cover and adaptor for the V1 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
4mm UOU cable clip, easy to attach - glue to a surface.
Wall thickness test designed for 0.4mm Nozzles This model is specifically optimized for 0.4mm nozzles, ensuring accurate and reliable results. The wall thickness progression is based on the typical extrusion width of a 0.4mm nozzle, which…
Mods to adapt original to work with 4mm rope and Shore95A TPU
Simple adapter 14mm garden hose adapter to G1/2"
I thought the materials list for the wireless bento box was excessive so I modified the box to only use 4mm magnets Changes: Brass inserts on fan duct → removed and replaced by holes for 4mm magnets 6mm magnets on wireless transmitter →…
Based around a 2020 aluminum extrusion, The bolt in pieces are placed, to precisely bend in a perfect 90 degree axis. This is a concept that works, but you might have to mirror some parts, in order to bend the tube in the particular…
I started building my own Slack Lack, but i used a Blink Mini as surveillance cam. It requires a permanent power suppliance via USB, so i had to guide it out of the enclosure. Since i have'nt designed anything yet, that fixed a real world…
Overview This precision screwdriver is designed to fit standard 4mm bits. A bit holder is located inside the handle, allowing you to neatly store 6 additional bits. The handle is 20mm in diameter and has a rotating end cap. Please note…
For 14x14 cameras to fit in Five 33's Tiny Trainer HD's canopy shell.
Encoder knob for 6mm O shaft or flower shaft. For encoder with push button. Material: Whatever you want. Support: YES
My screwdriver came with 8 hex bits in total, so I printed 2 holder. There is space for a maximum of 8 hex bits (2 holders) inside. Brim is recommended. No support needed. 0.2mm layer - PLA. Don't worry about the difference between the…
This design includes three sizes of connecting brackets for storage racks or shelves used in garages, kitchens, restaurants, storage rooms, etc., and which have metal frame tubes/pipes that are 1 inch (25.4mm) in diameter. These brackets…
This is a prototype avionics bay bracket for 34mm model rockets. The PCB brackets are made to fit a 3x7cm prototype PCB. See this imgur post for details about the build process for the avionics hardware. I designed this to develop a…
18T MXL Pulley for 4mm shaft Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options:…
90T MXL Pulley w/ 4mm shaft diameter for Makeblock eggbot (and other Makeblock bots) Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627…
Made to be screwed into a stud in the wall. I hung a PVC pipe between two of these to make a shelf for my filament spools. You could use drywall screws or any screw that's similar in size.
i printed ity with tree supports
Alignment package for co2 laser cutters with cloudray c-series head. ********If you are doing this on a FF Y-1200 laser or Y-400 substitute every time I reference the x axis with the y axis and vice versa because they are flip flopped.…
Decided to design some toy bricks optimized toward a 0.4mm nozzle. Great print for education, learning, and fun. Partially lego compatible, but not lego :0 UPDATE 1: Added Xtreme Fit Brick Set, an experimental bottom layer. Custom Section…
This is a deskhole part that fits perfect for the 64mm or 2 1/2" ikea fixxa holesaw. height fits the ikea table top "LINNMON".
16 slot Gridfinity compatible rack for 24mm Resistor Storage Tubes 4x4 rack fits in 3x3 Gridfinity base
This is a handle for 4mm precision screwdriver bits. The bits go in about 13 mm, which is a good compromise between secure holding and ease of retrieval. The handle can be printed from the handle part upwards without support. This is a…
This solves for under desk to shelf hanging of a 1U Omada switch. Print on the fastener side and with supports.
7X64mm Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
For best result print it upside down. Link for portafilter stand
I use HD_Creator's screwdriver a lot ( Ergonomic lockable bit screw driver ) but it only uses 6.35mm bits. I've made a very simple but effective adapter. It works very well for me. Print settings : Size nozzle : 0.4 Layer Height: 0.2…
We build a lot of tiny robots! Specifically UK Antweight (150g) Combat robots, and these need tiny tools. Not just tiny, but easily portable and always on hand. That is the exact purpose of these mini tools and holder - fit where allen…
Basic wheel with a 4mm diameter hole for an axle
I made a pegboard wall using a hole bit of 25mm however all I could find were wood dowels of 24mm so I designed a little shell to go around this 24mm dowel to increase the size to 24,8mm which fits comfortably in this 25mm hole
Modified it to fit 34mm watch chargers.
This S-Hook will let you hang measuring spoons and measuring cups, along with other lightweight objects Measurements are as follows: Overall height: 93.5mm Middle length: 65mm Smaller diameter: 25mm Larger diameter: 32mm Thickness: 4mm
Adapt a pivotal 25.4mm post (common BMX size) to 30.9 seat tube ID. Recommend PETG-CF or PET-CF. Tried EasyPA but it's slippery... Shim head has a relief to prevent cracking/layer separation. Can be printed vertically with no issue, as…
Customized version of https://www.thingiverse.com/thing:3218689 Instructions Using the following options: Bracket_Width = 4 Bracket_Height = 4 Bracket_Span = 4 Bracket_Thickness = 3 Category: Parts
An adapter for Estes Rockets to lower the engine size from a E to a D.
This is a two part model to hang a 54mmm (53.3) Normcore gravity distributor tool to a Multiboard panel. The model is designed to work with the rubber stand included with the tool. The Snap Mount attachment model is a separate part to…
Sharp edge protector Made as a spacer to keep the printer open while printing PLA but maybe use for covering sharp edges. Made to fit on 4mm thick glass, but added freecad file to adjust for your needs. Category: Replacement Parts
I've got loads of 4mm hex shank bits and only truly use a handful of them and don't need to haul them all around with me in my tool bag or let them take up space on my work bench. So I took my 20 most useful and decided to make a carrier…
This is a simple clamp to prevent 4mm Teflon tubes from sliding in and out of boxes or printer enclosures. Avoid printing it with materials that creep (permanently deform under load) easily.
Travel Telescope Discord server Hardware kits available for purchase Introducing the Travel Telescope 3.0, a completely redesigned iteration of the Travel Telescope. It’s the perfect companion for your next dark-sky adventure and can…
This is a simple clamp to prevent 4mm Teflon tubes from sliding in and out of boxes or printer enclosures. The V2.1 shape comes with no ridges, 0.5mm ridges or 0.75mm ridges for better grip on slippery tubes.
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
I designed this calibration probe to use the leftover 4mm dowels and bushings from a StealthChanger build. It's also built around the hartk1213 sexbolt Z endstop PCB. It works similarly to the sexball probe that is commonly used for…
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
This is a Socket to remove the nut of the Clutch on Honda bikes. Its an 24mm Nut. For the best strength print it with 100% infill. Fits 100%: Honda Rebel 125 1995 - 1999 Honda CB 125 T 1986 - ??? Honda Super Dream 1986 - ??? Honda CG 125…
Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Adapter (spacer) 3mm bore to 4mm diameter 8,5mm wide M3 screw to 4mm bore pulley
Schwamm 15x15x20 PC4 Kann ohne Support im Stück gedruckt werden PC4-10mm mit Support
Update (04/05/26) - fixxed eyetube on very short version to have the thumb screw m4 insert hole in the correct place. Update (01/05/26) - Added new very short version for the Travel Telescope V3.0 only (due to the mounting points being to…
This is a Multiboard hanger for Ryobi battery chargers that have holes spaced 114mm apart. You will need small thread T-Bolts to attach to Multiboard. 2/1/2025 - Uploaded Version 2. Has longer pegs so that it fits snug, but not too snug…
Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…
une bague en 24mm, ornée de fers à chevaux The rider's ring La bague du cavalier El anillo del jinete
