Modelones Nail Dip Powder 44mm Storage Bin/Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 x 4 Storage Bin/Box designed to store ~43mm (25g) Nail Dip Powder jars (cells are 44mm)
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 885
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I designed this model in Fusion 360. The jars were somewhere around 43mm so I made each cell 44mm.
I've included a Full and a Single model - the single model is one individual cell, and printing it takes ~40 minutes at 0.3mm. I used the single cell model to quickly ensure that the width and height would accommodate a jar prior to printing the full 4x4.