Wyniki wyszukiwania: 44mm

Apple watch series 6 - 44mm

Just a simple bumper to protect the watch. //updated dimensions 19.02.2021 Print instructions Face side down, no supports. Works from 0.05 to 0.3

Sports Edition Watch Band for Apple Watch, 44mm

Watch band with speed holes; designed to fit 44mm Apple Watch I printed this in 95A TPU and it worked pretty well. I tried printing the sizing peg out of various materials but the TPU held well enough and I didn't have to make it in…

Apple Watch SE Dummy Model (40mm/44mm)

Can be used for sizing comparisons, case designs, etc.

R2-D2 Alexa Echo 4. Gen (144mm)

Version vor bigger Alexa

Cable grommet / feedthrough - 2 sided - screwable 44mm

Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…

Flexi articulated Spider - Mini 44mm possible !!!

Here you have number two of my tiny (scary) heroes, the crazy articulated spider. It is designed with the connection type i use for my ultra articulated snakes, dragons and lizards. That enabled to get the size down to 44x36x10mm in…

tamagotchi case for apple watch 44mm

Here is the Tamagotchi case for Apple Watch 44mm, please scale it for easy assembly (I scaled 102.5% for my watch.) I used 5mm diameter, 2mm height neodium magnets inside. Hope you like it!

Apple Watch Guard 44mm

This can be printed with a 0.4mm nozzle without supports however I recommend printing with a 0.2mm nozzle, 0.06 layer height, and tree supports. I have used PLA only so far because it is flexible enough to snap on and does not pop off…

Bottom Bracket Tool 44mm 16T for (Bafang, G510, Ultra)

Bottom Bracket Tool for Bafang mid-drive use a plier to tighten the nut ( size of the hex is 45mm) Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30-50% Filament:…

Dock for AirPods 1 & 2 and Apple Watch 40 and 44mm (all series) Apple Watch Stand AirPods Stand

I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It should also fit for all other Apple Watches, cause the format never…

Bath Plug 44mm

A remix of https://www.thingiverse.com/thing:2188344 which has been filled in so that it can be printed flat without requiring supports. This makes it much easier to print in TPU. I have also scaled it to fit a standard UK 44mm bath drain…

Galaxy Watch5 44mm and Pro charging stand.

Just a basic simple charging stand for Galaxy Watch5 44mm and Pro models. Probably will fit older 44mm watches. Print bottom part with high infill for weight.

Spice Rack for Cupboard door, 44mm Square and 50mm Round spices

I had another spice rack that would hold the smaller 46mm spices that was downloaded from this site, but needed something for the rest of the spice jars.

Universal Wheel Center Cap - Inner Pitch circle 44mm

Printer: Own Build: ndl V3 Rafts: Doesn't Matter Supports: no Resolution: 0.2 mm Infill: 30% Filament: Generic APS or PETG PETG or ABS Notes: Universal Wheel Center Cap, no branding Inner Pitch circle: 44mm Category: Automotive

Throw lever 44MM

A simple and robust throw lever designed for 44mm. This model requires a 20mm M4 Bolt and nut.

Tool Tray for Contec Rock Steady Bike Repair Stand or any 44mm Tube/Pole/Pipe

I designed this Tool Tray to have frequently used tools right on hand while working on my bike, when it's inside my Contec RockSteady Bike Repair Stand. Most measurements should be pretty standard, although they were taken for use with…

Apple Watch stand (42-44mm)

Simple remix of Petr Skřivánek's 42-44mm very nice Apple Watch stand. Only the hole to get the charging cable through has been widened. Tested with Apple Watch SE 44mm original charging cable. Prints without supports.

Pin 22mm & 44mm for Snap Latch Bit Case

Pins for the Front and for the Rear Latch.

Elegant & Ergonomic Bathtub Drain Filter 44mm

Elegant & Ergonomic Bathtub Drain Filter 44mm Filtering part can be removed for easier cleaning. Printing with fine nozzle advised!

Desk Riser 44mm

My desk top is sitting on top of two Ikea Alex. I wanted to raise the desk top by about 45 mm and couldn't find anything I liked, so I made my own risers. The slots on top are there to stick on rubber pads. A bit less material would…

Cable gland - diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm

Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm

Printable RC Track Connectors for 44MM ID / 50MM OD Square Tube

-These parts were designed to fit 44mm ID 50mm OD square tube with 10.2mm button hole 75mm back from the face of the board. -The button cartridge is designed to work with 1" long ¼ diameter spring like the Prime-Line SP 9701 Spring and a…

44mm Glue Holder for Multiboard

No supports. Requires a snap or bolt with a push-fit head to fit into the board.

Galaxy Watch 5 44mm Stand

Just a quick thing I made, no supports needed

Galaxy Watch6 44mm Charging Stand

This allows you to charge your Galaxy Watch6 44mm standing up. It is fairly small and has a channel for the cable to be discreatly routed out the bottom and back of the dock. I suggest using double-sided tape to adhere it to a surface so…

Gewürz Halter Spice rack 44mm + 56mm + 5mm bar - 1x 2x 3x 68x93mm Big pack

Gewürzhalter, Durchmesser 44mm und 56mm für die gängigsten Gewürzbehälter, siehe auch Fotos ebenfalls 68x93mm für Großbehälter von Ubena Zum anschrauben oder einen 5mm dicken Rechteckbügel Spicerack diameter 44mm and 56mm, for srewing or.…

Bicycle bottle mount offset adapter (44mm offset)

This is an adapter to mount your bottle cage lower or higher on your bike frame. You need two M5 screws and nuts additionaly. I also included the Fusion360 file. Its parametric, just change the offset parameter in the parameters section.…

3dsets Wheel C for 44mm ID tire

I scaled down the outer edges of the 3Dsets' Model 5's wheel type C, to fit tires that have a 44mm inner diameter, which are usually used for 1/14 scale semi truck models. These will give the 1/10 or 1/8 scale vehicles a more “stock”…

Modelones Nail Dip Powder 44mm Storage Bin/Box

My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I…

Ikea Skadis bottle holder 44mm

Ikea Skadis bottle holder 44mm

DeWalt DWS-777 sawdust adapter 44mm

Print Settings Rafts: No Resolution: 0.20 Infill: 100 Filament: esun pla+ pla whatever you like

44mm OD Remix

Scaled to fit 44mm OD bottom brackets. 16 notch. Added 3/8" drive and retained the 32mm socket size. Printed at .28mm, 20% infill, 4 perimeters… holds up well with the torque wrench @ 50nm.

Makita 18v sander to Makita 18v vacuum adapter 44mm 22mm ID

Found this model very useful on thingiverse. Thanks to user names are stupid.

RC MB Jeep 44mm Wheels

This wheel suits 44mm RC tires with a width of 20mm. I have made theme to suit 1:14 scale truck tires for use on the RC MB Jeep in 1:10 by ossum . My jeep is still in parts on my bench so I have not been able to check wheel offset or…

Door Hook (44mm)

Simple Hook for 44mm thickness doors, with a thin profile of 1.6mm. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Category: Organization

Lancia Wheel Center Cap - Inner Pitch circle 44mm (for old Lancia)

Printer: Own Build: ndl V3 Rafts: Doesn't Matter Supports: no Resolution: 0.2 mm Infill: 30% Filament: Generic APS or PETG PETG or ABS Notes: Lancia Wheel Center Cap, Inner Pitch circle: 44mm, Outer Pitch Circle: 55mm Category: Automotive

IKEA skadis, Kleiner Rollenhalter für 44mm x 100mm Rollen

Kabelrollenhater

Apple Watch Band Holder for up to 6 x 40mm or 44mm bands

I tried many other watch band holders but the bands would keep falling off. So I designed this one where you insert the bands from the side. I keep it on the inside of my closet door and no more falling off. Also, it looks much neater…

SRAM DUB 44mm to 49mm bottom bracket adapter

Originally posted by rzschokke on Thingiverse: Use this to adapt a 44mm, 12 spline bottom bracket socket tool (such as Park Tool BBT-79) to a 48.5mm bottom bracket. I already owned a BBT-79, but when I replaced my SRAM DUB BB with…

12th Scale RC Pan Car Wheel Arch Template - 44mm

Template for cutting the wheel arch on the body of a 12th scale RC pan car. The template has a 44mm radius and allows for 0.25 compression on the foam wheels.

Magnetic Dust Shoe for 44mm Spindle

Magnetic Dust Shoe for 44mm Spindles Designed to fit common 44mm spindle size found on 3018 and related desktop CNC routers Vacuum inlet designed for common 1.25" / 31mm shop vacs Magnetic bottom allows for quick removal when changing…

Makita 2012NB dust collector adapter to 44mm / Festo

Makita 2012NB dust collector adapter to insert a 44mm connector for a Festool dust extractor. You can still use it with a 50mm diam (DN50) dust collector hose (outer diameter of the adaptor). Be aware Festo have different type of…

Holder for round 44mm thermometer / hygrometer

Super simple holder for a round 44mm thermo / hydrometer. I used this one: https://www.amazon.de/gp/product/B07JDSHD4Z Hole in the back to let air get to the hygrometer

Samsung Galaxy Watch 4 44mm Bike Mount

Required hardware: M3 Nut x2 M3 screw 15mm x1 M3 screw 8mm x1

Spool reduction 75-44mm

Reduction for a spool with a larger opening of 75 mm (flexible arms) to 44 mm. It significantly reduces the resistance to unwinding the filament from the arm. Optimized filament consumption. You need to print 2 (on both sides of the…

Scope Adjustment Ring - 44mm or 1 3/4 inches

A pretty basic model, but I figured I'd publish it just in case anyone else got use out of it. Once printed, you need to pry the gap open to insert an M3 threaded heat set insert. My biggest tip is when doing this, use the “backwards”…

Apple Watch 6 (44mm) Snap Case

Designed for Apple Watch 6, 44mm, my original design, suitable for printing with hard plastic, PLA, PETG. Easy to put on and holds well. My storage box for this cases

Case for MAC Pro Palette Refill Pan (44mm)

This is a remix of the Kryolan makeup case by Delfini. It is sized to take a 44mm MAC Pro Palette Refill Pan and contains a pocket for a 10mm x 2mm Neodymium magnet. Print instructions Unassociated tags: Make up Category: Containers Print…

44mm Coin Holder Stand – Premium Display for Large Coins

The 44mm Coin Holder Stand is a sturdy and elegant solution designed to securely display larger coins in your collection. Whether you collect commemorative coins, bullion rounds, or historical pieces, this stand ensures they remain…

Support de charge Galaxy Watch 7 44mm Samsung

Support de chargeur de montre Samsung Galaxy Watch 7 de 44mm. Ce support se fixe au mur, sur un meuble, …

External BB Hollowtech II Tool for 44mm Cups

Design Intent This Hallowtech II style bottom bracket tool is designed to fit a Praxis M24/PF30 Bottom Bracket , which has a 44mm outer external diameter. This Praxis bottom bracket has an expansion ring to prevent it from moving…

galaxy watch 2 44mm charger wall mounted

my very first adaptation, i really liked the look of the original, but could not find any wall mounted variants for this model. adapted in thinkercad (first experience with the program and adapting a excisting model) post your makes, give…

Apple Watch 44mm Nightstand Charger

With this model, you can hang your Applewatch on the side of your bedside table and charge it at the same time. As the watch stands on its side, the time is displayed nicely. The model consists of two parts that can be pushed into each…

Spindle motor holder 44mm

Spindle motor holder with clamp that is connected to main body by M4 screws. Holder is fastened to aluminium profiles. The photos shows model printed with PETG with 50% infill and 0.2mm layer height. The holder is designed for a motor…

32-44mm diameter plug for water trough

A simple plug for a water trough. Tapered from 32 to 44mm in diameter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16mm Infill: 10% Filament: Enotepad TPU Category: Outdoor & Garden

Bike brake rotor external Center Lock / 16-tooth 44mm bottom bracket tool - 40nM tested (PT 69.3/69.4/19.2 equivalent)

This tool allows the use of a 1/2" drive (torque) wrench to mount and remove bicycle 16-tooth 44mm bottom brackets and disk brake rotor external Center Lock rings. I found @rsilvers original tapered design of this tool nice but difficult…

Switch 44mm Wall Mount TL-SG3210XHP-M2

Brauchte schnell einen Wandhalter für einen Netzwerkswitch in meinem Fall einen TL-SG3210XHP-M2 der Halter passt natürlich für alle Switche die 44mm hoch sind. Druckzeit ca. 4h

Gridfinity 2x2 Bottle Stand 44mm and 22mm

Gridfinity 2x2 Bottle Stand 44mm and 22mm e.g. for eliquid bottle.

universal fence post cap / cover for pipe 14 - 44mm

44mm Scope Lens Cover

Anti-debris and Anti-reflection device for 44mm optics, with holes for running retention strap. Meant to be pressed onto a standard LVPO scope body to protect the lens when not in use. Pair with front lens cover.

Chip Racks for 44mm CPC chips

I created THREE different chip racks to fit CPC (classicpokerchip.com) custom 44mm chips. A. 5x20 = 100 chips, stacks on itself full of chips B. 4x25 = 100 chips, stacks on itself full of chips C. 4x20 on 39mm = 80 chips, stacks on…

Begode Master 5 Inch Headlight Bracket with 44mm buzzer

Used to mount 5 headlight that replaces stock headlight. Also acts as a front kickstand. Print in TPU. Remix of https://www.thingiverse.com/thing:5430088

Winkel für Vierkanthölzer 44x44mm

Ein Winkel für Vierkanthölzer

44mm to 39mm Bottom Bracket Adapter Ring

Filling 100% Layer thickness 0.25 Material PETG Nozzle 0.4

44mm 16 Tooth Bafang BB tool Chaintool

a BB Tool for Bafang Motors

Radiator Hook Ø 22,4 mm/D 44mm Sanibel

Towl hook for Sanibel Radiator with 22,4 mm pipe diameter and approx 44mm distance between the pipes (from middle to middle, not the spacing). Spacing is roughly 21,6mm.

Apple Watch 44mm stand/charger

This stand provides a convenient and elegant docking station for your Apple Watch. You can use the hole for the cable and the watch itself.

Prusa MMU2 Filament Passage for Platsa - 44mm Bottom Part

This is based on KalleKnall's awesome filament passage for a single IKEA Platsa cabinet. I am using a stacked Platsa cabinet which means that there is 44mm of wood between the two parts instead of 22mm. This part replaces Kalle's bottom…

CAMLOCK to 44mm adapter (Metabo RAS)

This CAMLOCK adapter can be used to connect tools with standard 44mm ID fittings. For example, my metabo radial arm saw has such a vacuum port. Adapter external diameter is conical 44mm. To be used with the CAMLOCK connector from @PeterH.…

Apple Watch Dock 44mm

Printed with 0.2mm, no supports needed! No screws, just stick it to the wall using some tesa powerstrip or some good double sided tape. Category: Gadgets

Wall Plug with Wire Passthrough (44mm | 1 3/8 in)

A simple wall plug with a cut slot for wires to pass through. Useful if you are running wires behind drywall to hide the

Phone Clamp for Tripod 44mm Quick Mount

Phone clamp for tripod 44mm quick mount system Heavily inspired by this model , however I modeled this entirely myself as I don't like modifying STLs (and I enjoy projects) The screw cap must be glued onto the threaded rod (make sure to…

Stability modification to 44mm tripod adapter

I added an overhang flange to the front and back of the adapter to help keep the telescope steady. The overhangs limit the front/back wobble of the telescope due to its weight. Suggested print orientation is on the side so the layers…

AVM FRITZ!Box 6660 Cable Vertical Stand 44mm

Inspired by ohanhi design, I created my own 44mm variant stand with extended plateau for a better stand. The 6660 fritzbox gets sold in different variants. The rented versions are usually the bigger one, the 44mm version seems to be the…

GoPro 44mm Tripod Quick Attach Mount

I have a large amount of GoPro buckle style mounts and a tripod that can use 44mm plates for quick attachment but no way to combine the two. So, I modeled a two-part, glue together solution! Hardware Required: Glue Print BOM: 1 x 44mm…

Binoculars lens (eye cup) cover ~44mm

Lens cover for the back of the Binoculars. Fits ~44mm lens. Works with Vanguard ED 10x50

AsiAir Plus mount 44mm tripod leg

That's a simple mount for my ASIAir Plus fit for tripod with 44mm diameter legs. It fits a bit tight, you can hear crackling sound when stretched, but nothing broke during few tests. Mount with device attached does not slide down on steel…

Sunlu Drybox Hygrometer Bushing for 44mm Holesaw

I wanted to add a round hygrometer to my Sunlu drybox and discovered that the holesaw's I own do not fit the dimensions of the round hygrometer I had. Rather than purchase an expensive holesaw with the right dimensions, I created a shim…

Apple iWatch bumper 44mm (iWatch 4)

This is a bumper to go over the screen, ideally to prevent a screen protector film from pealing up during use. Will work for only a Apple iWatch which is 44mm (iWatch 4 and earlier?)

Miniature 44mm Prusameter Spool - Compact Filament Swatch

Miniature prusameter spool that can be used as a display piece or a filament swatch. Design based on the prusameter spool on the prusameter summary page, 44mm in diameter, realistic proportions. I recommend printing the spools in diferent…

Bottle cap 44mm - Silica bottle accessory

Silica bottle cap with special end to replenish silica containers. Made for 44mm thread.

Tormek SVD-186 R // Addon for 44mm "roughing-tube" English U-shape

Attention: This tool makes no sence for the 44mm tube and does not work with the english form --- i didnt know it until it was made because i am new with the tormek and sharpening ;D ... perhaps someone wants to remix it ;) Happy printing!

Galaxy Watch8 44mm screen protection glass tool

I tested two different tempered glass diameters that fit the Galaxy Watch 8: 42.4 mm and 40.0 mm . Because of this, I designed two different alignment tools , each one specific to a tempered glass size, to assist with proper installation…

Container used coffee ESE pod 44mm

this is a simple container to put the wet used coffee pods in ESE 44mm format. it's divided in 2 pieces the base and a holder.

HSW flask holder (44mm)

This hsw modul holds flasks with a diameter up to 44 mm. We use it for scented sticks. The holder is tilted by 10 degrees away from the wall Strongly recommended to be printed with supports.

44mm bike pump wall mount

Minor remix of the original holder for 44mm pump. I printed it in PETG with supports, 3 perimeters, and arranged vertically to have layers perpendicular to the pump orientation.

Stihl 44mm piston ring compressor

Similar to other options but a little wider for strength, and with fillets.

Omada 1U Switch (44mm H) Corner Mounts

This solves for under desk to shelf hanging of a 1U Omada switch. Print on the fastener side and with supports.

Subaru XV Tweeter Adapter for Pioneer 44mm

This is a good solution to change the boring original tweeter from Subaru to a new Pioneer Hi-Def

Wall mount and corner braces for 44mmx94mm wooden beams

While building a new desk in the workshop I had a need for easy and stable mounting of wooden bars to the wall. The print contains 2 (identical) brackets that can be used with 44mm wide beams and 2 corner brackets (reinforced) for…

Free Halloween Party Ghost Mini - 44mm STL and 3MF

A small solid Party Ghost for a Halloween table display. Original parametric design developed for QuelShop with AI assistance. Files: one 44 mm tall ghost in STL and geometry-only 3MF, plus README. Both formats contain the same geometry;…

6-7mm diameter Coax cable standoff clamp for 44mm (1.75") mast

This model is for aiding in running 6-7mmm coax on a 44mm (1.75") diameter mast. Zip ties or velcro tape can be used to hold it in place on the mast. If planning a long term installation I would suggest either butyl tape or a durable…

44mm Brake Caliper Wind Back Tool

I needed a tool to compress the brake caliper for my van but couldn't find anything local. I used the parametric model from superdude123032 on Thingivers to make it work with my van. I increased the diameter to 44mm and spaced out the the…

Xbox Controller Holder for 44mm Table Leg

Xbox Controller Holder for 44mm Table Leg

Apple Watch 6 (44mm) Snap Case storage box

Apple Watch 6 (44mm) Snap Case storage box.

Zemismart adapter for 44mm roller blind tubes

I made these adapters so that the Zemismart roller blind motors designed for 37mm and 38mm roller blind tubes would fit the 44mm aluminium tubes (Acmeda type). This allows me to use the much cheaper Zemismart motors available on…

Cut on specific distance 44mm

I designed this tool to scribe cardboard boxes at 44mm height. This allows you to easily fold these cardboard boxes to a height of 46mm - 50mm. This has the advantage that I can cut many old boxes to the appropriate dimensions for a…

Apple watch 44mm band organizer

Thats a model i designed to keep my bands together in organized way. Original version could probably hold 10 bands

Galaxy Watch 5 44mm Charger Case Penguin

When downloading the 3mf KEEP the circle in the middle as it will disappear during slicing. If you want to download the STL then in your slicer software make a 29.5mm by 29.5mm cylinder and put it into the hole in the middle of the penguin.

Double stand for (2) 44mm NCL challenge coins

I couldn't find exactly what I needed, so I (very amateurishly) hobbled this edit. It holds my coins but I didn't do the best job so it's slightly loose. Looks fine though! If someone would like to do it better, I would be pleased!