1 / 8
Tool Tray for Contec Rock Steady Bike Repair Stand or any 44mm Tube/Pole/Pipe — zdjęcie 1
1 / 8

Tool Tray for Contec Rock Steady Bike Repair Stand or any 44mm Tube/Pole/Pipe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed this Tool Tray to have frequently used tools right on hand while working on my bike, when it's inside my…

Ocena
0 / 5
Polubienia
29
Pobrania
164
Wydruki
0
Wyświetlenia
1002
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I designed this Tool Tray to have frequently used tools right on hand while working on my bike, when it's inside my Contec RockSteady Bike Repair Stand. Most measurements should be pretty standard, although they were taken for use with the tools from my Topeak PrepStation Pro. I attached PDF-sheets with all important measurements.
It can be used on any 44mm diameter tube/pole/pipe.
The Version in the picture is V1. The STL-Version is V1.1 and contains some slight improvements.
I printed with supports turned on, although you might get away without, because they are only used for the screw and nut holes (10mm diameter).
To mount it all together I recommend using 4x standard M5x16 screws and 4x Standard M5 nuts.

Print Settings

I added some Screenshots of the print settings i used in Cura. Some more basic information: Nozzle diameter: 0.4mm Printed on my CR10 with PLA. Printing time for me was around 1d18h40min for both parts.

Category: Tool Holders & Boxes

Tagi