1 / 4
6-7mm diameter Coax cable standoff clamp for 44mm (1.75") mast — zdjęcie 1
1 / 4

6-7mm diameter Coax cable standoff clamp for 44mm (1.75") mast

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a stand off bracket to help in aligning Coax cable on a mast. Designed for up to three sections of coax.

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This model is for aiding in running 6-7mmm coax on a 44mm (1.75") diameter mast. Zip ties or velcro tape can be used to hold it in place on the mast. If planning a long term installation I would suggest either butyl tape or a durable double sided tape on the backside of the mount. 

I use these on my radio mast for two lines of coax and has dealt well with this summers winds that we have been having (2022/Scotland). 

Suggested materials are PETG, ASA, PCBlend or other UV resistant filaments.

Nozzle diameter used aws 0.6mm with a 0.2mm layer height Printed successfully on MK2.5S and Neptune 2 (modified for higher temp filaments.

Hope folks find this helpful

Tagi