1 / 4
6-7mm diameter Coax cable standoff clamp for 44mm (1.75") mast — image 1
1 / 4

6-7mm diameter Coax cable standoff clamp for 44mm (1.75") mast

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a stand off bracket to help in aligning Coax cable on a mast. Designed for up to three sections of coax.

Rating
0 / 5
Likes
3
Downloads
14
Makes
0
Views
243
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

This model is for aiding in running 6-7mmm coax on a 44mm (1.75") diameter mast. Zip ties or velcro tape can be used to hold it in place on the mast. If planning a long term installation I would suggest either butyl tape or a durable double sided tape on the backside of the mount. 

I use these on my radio mast for two lines of coax and has dealt well with this summers winds that we have been having (2022/Scotland). 

Suggested materials are PETG, ASA, PCBlend or other UV resistant filaments.

Nozzle diameter used aws 0.6mm with a 0.2mm layer height Printed successfully on MK2.5S and Neptune 2 (modified for higher temp filaments.

Hope folks find this helpful

Tags