Sunlu Drybox Hygrometer Bushing for 44mm Holesaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer to fit a circular or round hygrometer to a Sunlu Drybox (or really anything using a 44mm holesaw)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to add a round hygrometer to my Sunlu drybox and discovered that the holesaw's I own do not fit the dimensions of the round hygrometer I had. Rather than purchase an expensive holesaw with the right dimensions, I created a shim and ring to shim and fit the hygrometer into a 44mm hole. It all snaps together pretty tight (enough you can still rotate it if you need). It fits a little loose now, which met my needs but this would be easy to tighten up a big - let me know if you have any better suggestions or ideas or if it works great for you as well.
Thanks!
For reference here is the exact model of hygrometer I purchased but it appears to be the super generic round model sold pretty much everywhere: https://www.amazon.com/dp/B07GR65CNT?ref=ppx_pop_mob_ap_share
I printed this in prusament galaxy black PETG, you may also want to use petg as pla would tend to get soft at temperatures nearing 60c but I'm sure PLA would mostly work fine. I printed at .2mm for accuracy but .3 would probably work as well. The slim flat ring goes on the outside of the box and the shim goes on the inside - the hygrometer neatly snaps right into the setup and it stays in place via friction (thought you could use a drip of glue if you wanted).