RC MB Jeep 44mm Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This wheel suits 44mm RC tires with a width of 20mm. I have made theme to suit 1:14 scale truck tires for use on the…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 735
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This wheel suits 44mm RC tires with a width of 20mm. I have made theme to suit 1:14 scale truck tires for use on the RC MB Jeep in 1:10 by ossum.
My jeep is still in parts on my bench so I have not been able to check wheel offset or general fitment with the intended model. They do however work on the donor kulak.
Despite the over hang on the edges of the wheel halves I found that I was able to print them successfully in ABS without needing to use support.
M2 x 12 screws and nuts are required to clamp the wheel halves together. This has not been tested yet as I am waiting for my fasteners to arrive.
Category: R/C Vehicles