44mm Brake Caliper Wind Back Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brake caliper wind back tool that works with the dodge grand caravan rear brake calipers and probably many others.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I needed a tool to compress the brake caliper for my van but couldn't find anything local. I used the parametric model from superdude123032 on Thingivers to make it work with my van. I increased the diameter to 44mm and spaced out the the tabs an additional 2mm to fit properly. It worked well for both of the rear brake calipers.
Print material: PETG
Extra settings: 10+ perimeters
If the tabs aren't strong enough, you can use 2 M4x20 screws and nuts in the built in holes. I didn't need to, it worked fine without it.
It took less than an hour with a .6mm nozzle and .3mm layers on a heavily modified Ender 3.