44mm Brake Caliper Wind Back Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A brake caliper wind back tool that works with the dodge grand caravan rear brake calipers and probably many others.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I needed a tool to compress the brake caliper for my van but couldn't find anything local. I used the parametric model from superdude123032 on Thingivers to make it work with my van. I increased the diameter to 44mm and spaced out the the tabs an additional 2mm to fit properly. It worked well for both of the rear brake calipers.
Print material: PETG
Extra settings: 10+ perimeters
If the tabs aren't strong enough, you can use 2 M4x20 screws and nuts in the built in holes. I didn't need to, it worked fine without it.
It took less than an hour with a .6mm nozzle and .3mm layers on a heavily modified Ender 3.