1 / 2
Prusa MMU2 Filament Passage for Platsa - 44mm Bottom Part — zdjęcie 1
1 / 2

Prusa MMU2 Filament Passage for Platsa - 44mm Bottom Part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is based on KalleKnall's awesome filament passage for a single IKEA Platsa cabinet.

Ocena
0 / 5
Polubienia
5
Pobrania
32
Wydruki
0
Wyświetlenia
459
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is based on KalleKnall's awesome filament passage for a single IKEA Platsa cabinet.
I am using a stacked Platsa cabinet which means that there is 44mm of wood between the two parts instead of 22mm.

This part replaces Kalle's bottom part and ensures a clean passthroug also for stacked cabinets.

The part might be a bit overkill but I wanted to have a beefy part that can pull the wood planks a bit together to eliminate wiggle.

Print instructions

Printed in .2mm layers. PLA or PETG. My test prints are all in PLA and worked great.
Orientation depends on what you want to have:

  • Quick: Print the wider part on the bed with some small supports fo the overhang. Otherwise the loops of the perimeter might fall down.
  • Better looking: Flat side on the plate with support for the overhang/brim/wider part.

Tagi