Liczymy pasujące modele…
Holds a small amount of acrylic nail dip powder with a pour spout on one end to get the powder back in the container once finished (made in tinkercad, have not printed yet.)
OpenSCAD Source: https://github.com/kompetenzbolzen/oscad_gridfinity The size is parametric, if different pin distances, depths or container sizes are required, these parameters can be changed in the OpenSCAD source.
My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I…
My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I…
My wife was storing her Nail Dip jars in a thin folding cardboard box with hinged lid so I searched online for a storage box to better organize them. I was unable to quickly locate a model that could accommodate the jars' width, so I…
this is a small centerpiece for a portable dipole or linked dipole. it has space for a balun core and the cables can be directly winded on the centerpiece. there are also some spareholes to hang some other stuff on it. pictures will come…
I designed this clamp to program an in-circuit attiny85.
Object designed to hold Parking time-control-card (German "Parkscheibe") Consisting of: 1 box to hold Parking card 2 holders individually designed to fit exactly to shelf in car-door Items glued together No screws or glue needed to mount…
A little clip you can use with jumper wires to load the Arduino bootloader or other program onto an ATMEGA chip. Using 6 jumper wires with male ends, use a toothpick to remove the pins from the plastic caps. Insert the pins into the DIP…
Get the full bundle on Etsy: https://www.etsy.com/listing/4503032060/graduation-scroll-8-size-pack-diploma Commercial license available here: https://www.patreon.com/CookyStl Create clean graduation cookies with this Diploma Cookie Cutter…
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
Dipole antenna part. Will be designing end insulators next.
The model contains a internal structure as you can see in the second image. I chose to do this to be able to print this without any supports that would have been otherwise needed on the inside. If you want to make the vase heavier you…
The model contains a internal structure as you can see in the second image. I chose to do this to be able to print this without any supports that would have been otherwise needed on the inside. If you want to make the vase heavier you…
I hope you are recognized as the true hero you are if/when you print this for your person.
DIP8 90deg Right Angle Op-Amp Adapter I designed this adapter because I wanted to fit a Burson V7 discrete op-amp inside my Fosi Audio ZD3 , where there isn't enough vertical clearance to install it normally. The adapter rotates a…
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
Update 08/18/25: I created another version with thinner springs. It feels better and seems like it will hold up a little better when using PLA/+. For softer materials, you may stick with older version. Also went ahead and created a wide…
This is a remix of @GalvanicGlaze’s Diplo Duct – Ender 3 V2 4020 BMG Direct Drive. I’ve modified the model to better suit my setup: Adjusted the backplate to fit my linear bearing mount for the hotend Modified the extruder mount to work…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made…
This special type of slide dips your marble from one height to another in a special way. Thanks to the help of gravity! Any feedback would be appreciated!
A little clip you can use with jumper wires to load the Arduino bootloader or other program onto an ATMEGA chip. Using 6 jumper wires with male ends, use a toothpick to remove the pins from the plastic caps. Insert the pins into the DIP…
I do ham radio. An HF wire dipole or EFHW antenna needs to be wound up onto a spool of some sort when not in use. I do 3d printing. I have lots of spools lying around. Perfect for winding up antennas! The exact spool is:…
Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…
I designed these jigs to help align pins made from tinned copper leads and solder them at a consistent length. This is intended for those breakout boards that convert SMT to DIP for breadboards. Recommended to print out of polycarbonate…
These are brackets to hold the Crunchlabs crunch box diploma. I do them with my son and wanted to mount his diplomas on the wall. Just print 2 of them for each diploma. I used Command Strips to mount them to the wall while holding the…
The frame for my college diploma came with a unique mounting bracket. Since i moved houses i ended up losing the female half of this bracket. I redesigned the male bracket based off the one i still had and designed the female based off…
This was designed to hold the Waygo 221-2401 Lever Nut. It has a tab under the bridge across the connector to help secure it in place. It has enough clearance that the levers can be raised, but in the closed position, they should fall in…
Part of the Eternal Embrace series: a dramatic dancing dip pose with the couple locked in a romantic moment. Flowing fabric shapes add motion and elegance, making it a perfect gothic-romance centerpiece for weddings, anniversaries, or…
My university gave me one of those tiny "pocket diplomas" when I graduated. I wanted a way to actually put it on my desk without it looking like a random business card leaning against a monitor. To keep it from being top-heavy or sliding…
This is a bracket that holds the Wago 221-2401 wire connector. This bracket has strain relief holes to connect antenna wire to the bracket without any need for mini carabiners or other hooks, etc. The holes are sized for the popular wire…
This adapter along with 2 whips makes a dipole when attached to a painter's stick. If you have seen any videos on ham radio, you will recognize this Chinese antenna accessory. This makes it convenient to make a dipole with collapsible…
A unique 3D printable creation — this Dipole Antenna Feedpoint Cover, Weather Protection, Insulator Housing Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
The Fractal Wingman frame has a camera cage with holes that will accept a small dipole antenna. However, I felt that the antenna was too close to the carbon. I had also experience low link quality at only 1km away, which shouldn't…
Dip Bottle Standar Desing Two different body sizes Standar thread in body and cap, they match the real bottles SP-410 The cap has a different desing due to 3d print without supports (4th image) Not for real usage, printed materials are…
Dip Bottle Cap Replacement If the cap of your dip bottle just broke, you can print a replacement They come in two different desings (3rd image) Maybe not for real usage, printed materials are NOT food grade You can add your brandname…
Hello everyone, This is my design for a Diplocaulus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
I wanted to try and coat the downside of a phone holder with some latex to prevent it from sliding around on the table. So i thought the best way would be to just dipp it instead of painting it. I couldnt find anything near to what i need…
a support to hold the antenna perfectly at 120°, perfect for receiving weather satellites such as NOAA and Meteor. The holes in which the antenna fits have a diameter of 7mm
Easy to print baby dipping spoon. Loosely modeled after the FlexiDip. The large surface area allows a baby/toddler to dip the spoon without having to worry about the correct fine motor skills to use a normal spoon. Depending on filament…
Provide you plants with water along with medicines or nutrients by upscaling waste bottles. This model is made for bottles having 28-29mm as brim size. Cut out the bottles bottom part thus giving an open end to fill in meds or nutrients…
A flag I have designed for the Diplomacy board game, to replace the cardboard ones that come with the game. I also printed on paper the flags of each nation, front and back, to glue them on the pieces. I include a pdf with the flags ready…
Replacement handle for NA Miata Dip Stick. The original one broke off and was missing. This one replaces it. Filament: For Best results: ASA Alternative: PETG Supports: None Infill: Minimum 15% Brim: Yes (As Applicable) Assembly…
A great Wall Art of a cute Diplodocus. Do not forget to upload your makes, thanks ! Inspired by a sticker
This was a fun design for my wife. It's simply a holder that has a spot for a bag of chips, then a slot for the little dip cups. Enjoy! https://youtube.com/shorts/rYkaB-Cc4I0
Ein Filtersystem, das neben Aktivkohle auch einen Feinfilter enthält, könnte beim Drucken mit ABS von Vorteil sein. Die Aktivkohlepellets werden in das Innere des Filtergehäuses eingefüllt, bis es zu etwa drei Vierteln gefüllt ist. Bevor…
Transmission dipstick on my Dodge Van keeps falling off so I tried designing lock tab to hold it in place. Fits on ¾" diameter dipstick tube Mopar 904/727 transmissions. 2 piece design - glue together. Consider printing in high temp…
A rack for holding DIP ICs which is the same size as a cassette tape, so you can organize all your ICs in your old cassette racks. Each rack has 20 slots, which can each fit 3 74xx chips (DIP14), or 6 555 timers (DIP8) I have also made a…
I remixed the original to work with the original Ender 3 extruder. Currently this is only the version for heated inserts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 38 Filament:…
Fits Goddard's 10oz bottle - 50mm wide x 150mm tall - 4mm holes - Fast Draining - No supports! Recommend you use PETG. Fill the basket with your earrings and loose jewelry and dip without having to retrieve! Scalable to other size…
Plug to block off the dipstick tube hole in most GM transmissions. Must use with existing dipstick grommet.
Intended for resin printing. It writes a bit dry and has higher feedback than metal or glass pens, but it's much easier to replace.
EN: To identify the control that activates the moderate intensity, forward illumination. To indicate the operational status of the low beam function. DE: Zur Identifizierung der Bedienstelle des Abblendlicht. Zur Anzeige des…
This is a center hub for a homemade wire dipole, using a SMA plug (TE 1052422-1). Drill the 4 holes to 3mm (M3), solder in the wire, use a M3 bolt to connect a ring lug (RS 0433028 ).
3D Printed Antenna Holder for V-Dipole (137MHz Weather Satellites) Overview This project is a simple and practical antenna holder designed to mount a V-Dipole antenna for receiving weather satellite signals at 137 MHz. Using a 20mm PVC…
A dipper used to submerging small electronics into solvents such as acetone. The holes in the lid and base are 1mm in diameter, therefore you need to allow time for the inside to fill which might depends on your solvent. This was made out…
These mounts allow you to connect a 5.6m whip (or pair for a dipole) to create a portable HF antenna. The toroid (size 140) is held in place with zip ties that are fed through the body of the part. You will see that the bill of materials…
I have borrowed some ideas from this project: https://www.thingiverse.com/thing:1104612 To build you will need: - Headpins : 3 inch 21 gauge gold plated brass headpins (Ebay, Aliexpress) - Spring: 8mm external diameter, 26mm length, 0.8mm…
I have tried other models of same kinde stands, but none of them suited me well enough, so I decided to make my own. Works for all raised up Fords 8" displays (sync 3/3.5/4) The phone stand has a magnetic end cap that I purchased…
This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.
Print laying down, some support is needed due to orientation. Use temp resistant material I used petg but i would suggest asa or abs. So far it held up. This was for a 2010 model check if others will use the same.
I needed a hook for light hanging that fit the short edge of our siding. The model fits 8mm or 5/16" hardiplank. Scale it if you have something a little different (thicker or thinner). These have only been out for a few weeks, but are…
We either always have a few left over sauces, or we need a few more. This tower is meant to be a buffer for those sauces. It holds six containers, and sauces can be removed from the bottom.
End a lecture about CAD & 3D printing with this 3D diploma. Students love it. Takes only 10 minutes to print. No supports.
THIS IS NOT A FIREARM OR FIREARM COMPONENT, NOR CAN IT BE CONVERTED TO BE SUCH. THIS IS A TOOL TO ASSIST WITH PAINTING OR APPLYING HYDROGRAPHICS I needed a better way to control an AR platform pistol or rifle while painting it and…
Custom-designed nursery pot with great drainage that perfectly fits an emptied out Diptyque Candle in the Classic size (6.5oz). After burning some of these really beautiful candles, I couldn't just throw out the vase, so I decided to…
Over time, the plastic of these dipsticks swell up or something 'cause they become impossible to turn without pliers. Well, I lost my pliers…
Your Ariens snowblower has an auger gearbox. It has oil in it. Have you ever checked the oil level? Now you can. Just remove the filler bolt, dip and read. The level should fall within the notch on the dipstick. Add oil as necessary. Read…
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
A gridfinity bin for holding nips for dip/fountain pens. Recommend printing with 5% Gyroid Infill to balance between speed and strength, but Lightning or Adaptive Cubic are also good alternatives. The most recent iteration can always be…
Thjs is just a different base I designed for the double dipped pointy plant pot. It can be flipped and used either way
While eating chicken nuggets, we were concerned about optimizing the amount of sauce each nugget receives, so we decided to design a mechanically optimized gravity system for dipping. (Ah, to be in the mind of a 9-year-old.) The sauce…
This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…
A bracket to create a dipole antenna using 1/2" (5/8" (16mm) actual OD) copper pipe, would work with EMT also. Designed to be bolted together will work with M4 bolts, or #10-24, or #10-32 bolts. The hole in the main body was sized for a…
Sometimes have trouble with proper drainage down the hose, resulting in water flowing *below* the machine, which is hardly noticeable. To leverage that problem, until the drainage is fixed properly, this tray can pe put below the machine,…
I printed this out of PLA and when I checked after a drive it became super flimsy. Don't use PLA. I printed it in PETG in October of 2024 and I'm still driving on that sucker (Feb 2025). Fits nice. I was fortunate enough to recover the…
rubber stopper not made. you may be able to print that in TPU. Mine works with just PLA but you may need to print in PETG or ASA if it gets too hot and melts
I needed a Diploma for one of my next projects, so I created one, looking forward to all of your remixes ;) If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding…
What is it? A Modern and sleek unique bowl that fits in anywhere and has endless possible uses and capabilities in the kitchen Where else can you access this model and others? This model is also available on our Patreon as well as many…
Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”
Mini dipole antenna base with BNC. I designed this for QRP operations with my IC-705 radio. Uses 4mm screws and has an optional 5mm hanger hole and wire strain relief holes for 20 gauge wire. I use 22 gauge teflon coated wire. Also…
Oil dipstick for car It is best to make it from materials that are resistant to high temperatures. ABS is suitable for
I may have had a couple too many ICs to insert in circuit boards… and trying to get the pins to go in straight was annoying me. I designed this tool in an attempt to make my life easier. Quickly pop an IC in the tool - tool bends IC pins…
Dvoudílný držák modulů DCCDIP2 od firmy Ignitech pro zapalování motoru Rotax 912. Držák je navržen pro montáž na místo mimo motorové lože letounu.
