Liczymy pasujące modele…
This 3D printable organizer is designed to keep your workshop neat and efficient. It features multiple compartments arranged in a grid layout, each with a sloped front for quick access to small parts like screws, bolts, nails, and other…
Print on the side. Designed to use minimal material.
A drawer that is designed to keep your nails and screws from being missed.
ALL the Galastropods from SystemEra's Astroneer, including EVA! I extracted these models from the game, cleaned up, repaired, smoothed the texture, and made printable. Enjoy! Sylvie Usagi Stilgar Princess Rogal Bestefar Enoki
If you want patreon exclusive models, any of above 3D models, new/upcoming models or need commercial license, please visit https://www.patreon.com/cylix3d By joining, you'll gain permission to sell my models, exclusive designs, private…
i Made my wife a neon sign for his nails bussines, the neon light that this model support it is the 5mm neon flex strips. i cut the model in four parts so it could be printed in a 220 x 220 bed. i left some holes so you could put the…
A drawer that is designed to keep your nails and screws from being missed.
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
For 1.2 mm Nails 10 mm wide LED Strips, 1 mm Thick make sure you don't whack your leds into oblivion
Stand for painting press on nails or nail tips, with wings to easily pick up and adjust position without touching wet polish. OpenSCAD code written with AI, edited by me.
This 3D printable organizer is designed to keep your workshop neat and efficient. It features multiple compartments arranged in a grid layout, each with a sloped front for quick access to small parts like screws, bolts, nails, and other…
Print on the side. Designed to use minimal material. CAD file included for modifications.
I dig the original very much. sadly double sided adhesive is not always usabel, strong enough or at hand. so I made two remixed versions. one for use with a screw and one for use with one or two nails. enjoy! :-)
I used blue PLA at 0.3mm layers and 15% support cubic infill. Designed for a surgical glove size 9 hand, or a medium nitrile glove-sized hand.
I use this cool shelf bracket to hold my shelf up. It is quite strong and make sure the infill is sufficient.
My other half was asking for a simple storage solution for her Crystal Nails ® base & top gel products. I took Gridfinity bins as samples and modified them so the 4ml and 13ml sizes would fit nicely.
Hang plants and other items from the ceiling without the drywall or paint damage of stick-on or toggle style ceiling hangers. This hanger uses up to 4 small painters nails to mount the base, and includes a dome shaped cover panel. The…
If you want patreon exclusive models, any of above 3D models, new/upcoming models or need commercial license, please visit my Patreon . By joining, you'll gain permission to sell my models, exclusive designs, private community chat…
ALL the Galastropods from SystemEra's Astroneer, including EVA! I extracted these models from the game, cleaned up, repaired, smoothed the texture, and made printable. Enjoy! Sylvie Usagi Stilgar Princess Rogal Bestefar Enoki
If you want patreon exclusive models, any of above 3D models, new/upcoming models or need commercial license, please visit https://www.patreon.com/cylix3d By joining, you'll gain permission to sell my models, exclusive designs, private…
Cable clip for nails in 10 different sizes. Size: 3mm 3.5mm 4mm 4.5mm 5mm 6mm 7mm 8mm 9mm 10mm
A small box was needed to store the Doonails nail polish. The nail polish jars have a diameter of 43mm. Für die Aufbewahrung des Nagellacks von Doonails wurde eine kleine Schachtel benötigt. Die Nagellackgläser haben einen Durchmesser von…
I didn't see any hooks heavy duty enough to hang my full backpack with so I designed this one. It uses 3x 1.5 in 15 gauge finishing nails at an angle to distribute the load. the nails measure about 1.83 mm in diameter. Print on it's side…
Note that you'll get a nicer model than my photos, I've updated the F3D and STL for a round-ended handle and a “BONSAI MASTER” engraved motif :o) I've used a single bent nail for years for bonsai root raking to remove old soil before root…
Was Looking for models with hidden nails, Then Decided to make something for myself. Filament: Sunlu High Speed PLA Infill: Gyroid, 15% Print Time: ~30min Believe the Nails used are 17 GA.x1-¼" Nail Sizes are weird feel free to modify as…
This tool is designed for efficiently filing nails and calluses with a user-friendly vertical orientation. It features a flat, elongated body with a slightly curved ergonomic grip for comfortable handling. The tool is 3D-printable and…
Base for NeoNails. Different diameters for nail polish and remover
Board game organizer for Conan (monolith) and the following sets and expansions. Also supports sleeved cards, I use mayday premiums (thicker ones). Kings Pledge Stretch goals/ Collectors Box Stygia Nordheim Khitai Conqueror & Tome of…
Use petg plastic, the table temperature is 70 degrees, you can change the size according to your needs
Make sure to use supports everywhere and infill at 15 or 20% your choice and then hammer it to some wood with some nails and enjoy.
Create your own snail trap. Fill a glass jar (opening about 60 mm) with beer, bury it in the ground and you will see that snails will quickly come to your beer trap. Snails love beer! Don't forget to empty your jar regularly, especially…
The magnets are inserted into the clip during two pauses that are preset in the print profile (two magnets at each pause). After the magnets are inserted, you must manually resume printing. Printer stops at layer 142 and 314. This…
Nine Inch Nails NIN Logo - 3 files included. One is just the outline, the other two are "signs" with backing layer as well, 4mm and 10mm high. 180mm x 80mm x (4 or 10)mm. Color change at (2 or 5)mm on for the sign STLs. Pictured print is…
Flush-Mounted Cable Clip for Secure Wall Installation This versatile cable clip is designed for flush-mounted installation of one or more cables in wall channels. It allows you to neatly secure and align multiple cables before plastering…
Declutter your manicure station with this stylish and functional gridfinity organizer designed specifically for your MANIKO UV nail art supplies. This organizer conveniently holds: 9 packs of MANIKO gel strip boxes 1 MANIKO UV Light 1 USB…
i Made my wife a neon sign for his nails bussines, the neon light that this model support it is the 5mm neon flex strips. i cut the model in four parts so it could be printed in a 220 x 220 bed. i left some holes so you could put the…
Jedná se o jednoduchý test pro trénink psů. Pod krabičku se schovají dobroty a pes musí zahlásit, že jsou pod krabičkou. Krabičku doporučuji tisknout z PLA nebo ASA. Do děr v rozích se umístí hřebíky o průměru 3 mm. Tisk jsem prováděl ve…
This custom-designed mount securely holds a motorized spinner, allowing a magnet to hang freely beneath it. It's specifically tailored for use with magnetic nail polish, helping to create the distinctive glass bead style effect by…
Description Turn your shower into a DANGER-ZONE (seriously DO NOT take this in the shower) with this nail bed soap dish. The perfect gift for the masochist in your life! This is designed to use wire nails to make a bed of nails for your…
Hornet's Pale Nails, resembling Japanese kunai, are a Silk Skill acquired from a Weaver alter in Silksong. These ornate knives, woven from Hornet's silk, are reminiscent of the design of the Knight's Pure Nail in Hollow Knight. This file…
You can use 3 normal nails to fix the mount to the wall. Supports needed to print (see image). I printed with .6mm nozzle in PLA
Nail-in Cable Clips is a great design, but I couldn't find 2mm nails at multiple hardware stores (USA). So I made this design that works for the readily available 16, 17, and 18 gauge “Wire Nails” found at the big box stores (Home Depot…
I modified the body of the crossbow so that it is able to shoot 36mm finishing nails. I also added a handle to the main body, and increased the thickness of the crossbow arms. I also added a window so you can see how many shots are left.…
100x160mm sign, with art of a nail being hammered and text "Carpentry nails it" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of…
This small tool will help you keep the nail straight and protect your fingers when attaching your HO/OO rails. -- Ce petit outil vous aidera à maintenir le clou droit et protègera vos doigts lorsque vous fixez vos rails HO.
A simple design that only cost about 65 cents, print base on 20% infill, nails on 100% infill. First put 1 nail on a flat surface then place 8 others across the first one going opposite directions then place the last one on top going the…
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
For 1.2 mm Nails 10 mm wide LED Strips, 1 mm Thick make sure you don't whack your leds into oblivion
Stand for painting press on nails or nail tips, with wings to easily pick up and adjust position without touching wet polish. OpenSCAD code written with AI, edited by me.
You can print this without any supports, and then just slide the bases into the heads easily. Maybe add a little glue if you want or if your print wasn't nailed (:)) the snap fit between the two. The original model meant to be printed…
This is a drinking bowl for small animals (We use it for our snails). It features two separate compartments, one 13mm deep, one 5mm deep at a total height of 15mm. I created it in OpenSCAD and also attached the scad file but beware: The…
This model may require supports where the 2x10mm magnets go. Its a small bridging area, so just test print one nail holder and see how it fits before printing the rest, or be brave and print them all at once. :) The two lines going up the…
Simple snap-together shelf for storing your (light) trinkets and knick-knacks like Gunpla, Funko Pop, Miniatures, jewellery etc. Snaps together without glue. Two small holes in the plate back hold thin nails and hide them. I would not…
Beverage Can Opener against Broken Nails A keychain tool for opening beverage cans preventing broken nails or nail polish. Key Features Anti-slip curved thumb rest for user comfort with dirty or wet fingers Easy tab lead-in enables a…
Garden fastening nails for garden fleece. You need to print horizontally, with supports, then the nail will be stronger Supports: Yes Resolution: 0.2 Infill: 100 Filament: ASA, PETG
This is an inexpensive visual center punch that lines up with measurement lines and makes it fairly easy to strike accurate, centered punches. It also has additional ruled posts that permit you to strike additional spaced punch marks with…
Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…
Quite accurate model of Milwaukee sawzall blade. However, the real blade has a little bit of curve to it and the teeth are bend out. Will be good help when creating your own custom handles and blade protectors.
Triangular hanging flower pots - no nails or wall damage required. Small metal hooks are needed to be screwed into the bottom of each planter for assembly. I used the ones in the photo. Large hanging door hooks fit a typical door with…
I was thinking of trying the spool mods that use bearings, but I don't have any bearings. I don't want to have to buy bearings. What I did have was some brad nails. This design uses 3D printed rollers and some 16ga brad nails as axles.…
A convenient and simple 'over-door' hook for anyone who doesn't want to use nails or screws. The arm that goes over the door has an interior length of 35mm but you should be able to alter the dimensions in your slicer if your door is…
A small hanging hook that you can easily nail onto the wall! The hook hosts up to 4 tiny nails (1 - 1.5 mm diameter), it is not meant for heavy loads, but rather light stuffs like bath towels. Happy printing! 3Diddy
Download the Fusion 360 file to modify it to your needs. I printed it on my Bambulab X1 without supports. I recommend printing with supports.
an holder for nails to be nailed slanted, oblique Fusion360 project available
I only added "nails" for the lid. One nail can be removed to turn the lid. You have to drill a little hole, that the nail can fix the lid print with support from the backside Category: Containers
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
Top and bottom part - Optimixed for Nailster Products Changes: Bottompart changed from 5x5 to 4x4 with 20mm bottom holes. And raised 20mm Toppart changed from 5x5 to 4x2 and 1x1 with 20mm bottom holes. Meassurements Small compartments:…
Simple model of bowl for snails in terrarium. I also printed spikes for the bowl so the bowl holds still in soil and snail wont turn it up. (not included here)
My Misses wanted to have her dumbbells on the wall and I thought a protective plate might be a good idea to protect her fingernails and the wall at the same time. We ended up mounting the hooks without the plates, because my Misses…
Holds a scx24 and transmitter. Edited from o.g. to have nails to bolt into wall Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: Any Infill: Any Filament: Any PLA Any Category: R/C…
A version of my tea bag dispenser utilizing classic keyhole slots. Throw a couple screws in the wall and easy does it. If you don't want to use magnets or command strips or velcro for various reasons, this is probably the easy way to hang…
A friend in San Diego did one of those LEGO-style nail jobs with studs made from glued-on rhinestones of some kind. As cool and fashionable as it looked, I noticed the studs were actually unusable with actual LEGOs so I figured that THAT…
Ive enjoyed NIN for a long time. Here is a NIN logo. Category: Signs & Logos
Just like the regular press-on nails, only cooler and sized for thumbs. Unpainted, it is LEGO compatible. This one prints without supports in your resin printer. If you found this useful, it would bring me great joy to see your work - so…
With this lid you can turn e.g. a Nutella jar into a snail beer trap. It fits 750 g or 1000 g jars (or others with an opening of about 71 mm). Bury the jar in the bed deep enough so that the rim still peeks out a bit. Then fill the glass…
L-bracket with 1.45mm holes (3x) to snugly hold woodworking nails for most small projects.
UPDATE (February 2025): Now with Step and Fusion files to allow adaptation to individual finger shapes. My fingernails break often, but I didn’t find generic artificial fingerpicks adequate. PATH TO A SOLUTION: Create a 3D scan of the…
just print it probably at least 15%infill with 3/5 perimeters so it doesn't break with the nails
An easy and fast print to help you hang posters in the wall without nails. You will need only Blu-tack or a similar product (and a 3D printer of course :)). Una impresion rapida y sencilla para colgar posters en las paredes sin usar…
Hello! I present to you a project featuring numerals for a wall clock made from construction nails. In my case, they are 3D printed using PLA and painted with a rust-effect finish. I recommend printing at a layer height of 0.12 and a…
Round holder for 7 neonail nail polishes or other round nail polish tubes. The holes have a diameter of 24mm.
5 to 15 % Infill 0.15 to 0.2 mm Layer Height Negative horizontal expansion is recommended: -0,02 mm to -0,06 mm The file is set 350 mm long for better results, but if you have less volume printer, scale the mesh. Use glue to glue nails'…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these hands for my costumes. Catwoman: https://www.printables.com/model/678691 They may also be useful for…
Model: Doonails / Revel HexaStack Glass Container Organizer Material: PLA (or other) Supports: Build plate only Design: Modular hexagonal structure Capacity: Holds nine DipDrip glass containers Feature: Stackable for space efficiency…
I dig the original very much. sadly double sided adhesive is not always usabel, strong enough or at hand. so I made two remixed versions. one for use with a screw and one for use with one or two nails. enjoy! :-)
===UPDATE February 7, 2024 Color separated Print Profile available: HERE ===ORIGINAL POST I'm a big fan of the original design & decided to add fingernails in a second color. Get the rest of the hand from the original designer…
7X7 Geoboard with removable nails Board: 105X150X15mm Nail: Φ3.5X26mm
Since Displate sticker magnet attachments don't stick to plastered wall, I made this small part to stick the magnet to and fix to the wall with 4 small nails. How to use: Print the model Stick the magnet Nail the part to the wall Place…
A little tray to put those little piece when your working on something and you don't what too lose those parts.
These washers are to use with nails that you want to have a larger head. Good for mounting things to the wall or acting as a spacer. ** added thicker 2mm washers Dimensions: 1cm washers: Diameter: 1 cm Nail hole diameter: 2 mm Nail hole…
2 remixes of the center piece of the Canvas hanger by GarryGB: Nr. 1: for a nail but at only 30° instead of 45° and with a flat survace so you can hit the nail untill it is fully in. Nr.2: for a Screw at 90° 1 remix of Frame_Top with a…
These are templates for quickly drawing layouts for thumbnail sketches and storyboards in my sketchbook. I designed these to fit into my favorite notebooks: the Vanguard softcover notebook in Flagship size from Baron Fig. The page size is…
Nine Inch Nails “Broken” EP logo decoration Part of my new series of band logo home decorations that can stand on their own, perfect for displaying on a desk or a shelf! Dimensions: 163mm w x 190mm h x 16mm d (can be scaled up or down)…
![Nail-in Cable Clip for 18-16 gauge nails [3-12mm]](https://media.printables.com/media/prints/5b0ec136-bdb4-423f-979a-2a962e332c23/images/11309656_b5c53c17-43d6-44b9-8f16-2406276772d2_ada95bf5-2fd5-4ac0-b563-0557b70cbc3c/img_7995.jpeg)
