Two-level drinking bowl (for Snails/Tortoises)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drinking bowl for small animals (We use it for our snails). It features two separate compartments, one 13mm…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a drinking bowl for small animals (We use it for our snails). It features two separate compartments, one 13mm deep, one 5mm deep at a total height of 15mm.
I created it in OpenSCAD and also attached the scad file but beware: The Minkowski calculations for this model are somewhat time-consuming, the finished model rendered around 16 minutes on my Machine...
Print Settings
Printer:
JGAurora A5
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20%
Filament:
Goedis PETG
Transparent Green
Notes:
I'd advise to print this bowl at 0.1 mm layer height to get a smoother surface where less stuff can stick, making the bowl easier to clean.
Category: Pets