Two-level drinking bowl (for Snails/Tortoises)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a drinking bowl for small animals (We use it for our snails). It features two separate compartments, one 13mm…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 83
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
This is a drinking bowl for small animals (We use it for our snails). It features two separate compartments, one 13mm deep, one 5mm deep at a total height of 15mm.
I created it in OpenSCAD and also attached the scad file but beware: The Minkowski calculations for this model are somewhat time-consuming, the finished model rendered around 16 minutes on my Machine...
Print Settings
Printer:
JGAurora A5
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20%
Filament:
Goedis PETG
Transparent Green
Notes:
I'd advise to print this bowl at 0.1 mm layer height to get a smoother surface where less stuff can stick, making the bowl easier to clean.
Category: Pets